Precision Fixed Workstations

Last reply by 02-02-2023 Solved
Start a Discussion
2 Bronze
2 Bronze
114

Mini Mono PERC Controller for 7920 Rack

I want to install either a PERC H730 or H740 in my Precision 7920 rack workstation (I don't want to use up a PCIe slot).   The DELL documentation lists this as possible and the motherboard has the mounting posts next to riser 1A.  However, I am going to need a cable from the board to the backplane.  I have found several which all appear to be for PowerEdge servers but not managed to find the one I need for the 7920 rack.  Can anyone please tell me the part number?  

Solution (1)

Accepted Solutions
3 Argentum
111

The cable you are looking for is the 12Gbps SAS Mini-SAS HD to Mini-SAS HD cable, which is used to connect the PERC H730 or H740 Mini Mono to the backplane in the Precision 7920 rack workstation. The part number for the cable is 0W13M, and it can be purchased from Dell or authorized resellers.

View solution in original post

Replies (3)
3 Argentum
112

The cable you are looking for is the 12Gbps SAS Mini-SAS HD to Mini-SAS HD cable, which is used to connect the PERC H730 or H740 Mini Mono to the backplane in the Precision 7920 rack workstation. The part number for the cable is 0W13M, and it can be purchased from Dell or authorized resellers.

2 Bronze
2 Bronze
108

Hi, fast reply - thank you.  I googled the part no.; no hits so i'll give Dell a call.

104

You're welcome! If you're having trouble finding the part you need online, reaching out to the manufacturer or a authorized reseller can be a good next step. They may be able to provide additional information or assist you with purchasing the right part. Good luck!

Latest Solutions
Top Contributor