1350 cnw Wireless Reconfiguration

ETschantre,

Wireless Connection Setup

Using Wizard Setup to Configure Wireless Settings

The following steps describes on how to configure the wireless settings:
1.Insert the Dell 1350cnw Drivers and Utilities CD provided and the Easy Setup Navigator file launches automatically.
2.Click Guided Setup

3.Select Wireless Connection, and then click Next. The setting method selection window appears.

4.Ensure that Wizard is selected, and then click Next.

5.Follow the instructions until Check Setup screen appears.
6.Confirm there are no errors displayed in the operator panel, and then click NO.
7.If you see any errors, click YES and follow the instruction.
8.Click Start installation.
9.Select Local Installation, and then click Next.
10.Check if the printer to be installed is listed in the Select Printer screen, and then click Next.

A NOTE indicates important information that helps you make better use of your computer. NOTE:
If the printer to be installed is not listed in the Select Printer screen, try the following steps:
◦Click Refresh to update the information.
◦Click Add Printer, and then enter the details of the printer manually.
11.Select the required items on the Enter Printer Settings screen, and then click Next.
12.Select the software to be installed, and then click Install.
13.Click Finish to exit this tool.

Wireless Configuration is complete.

Using Advanced Setup to Configure Wireless Settings

To use the Advanced Setup, display the Configuration Wireless Setting screen.

Displaying Configure Wireless Settings Screen
1.Insert the Drivers and Utilities CD provided with the printer in your computer. The Easy Setup Navigator file launches automatically.
2.Click Guided Setup.
3.Select Wireless Connection, and then click Next. The setting method selection window appears.
4.Select Advanced.
5. Select a connection method from the following: ◦WPS-PIN
◦WPS-PBC

If the selection is WPS-PIN

A NOTE indicates important information that helps you make better use of your computer. NOTE:
WPS-PIN (Wi-Fi Protected Setup-Personal Identification Number) is a method to authenticate and register devices required for wireless configuration, by entering PIN assignments to a printer and computer. This setting, performed through access point, is available only when the access points of your wireless router supports WPS.
1.Select WPS-PIN, and then click Next.
2.Follow the instructions until Check Setup screen appears. Confirm there are no errors displayed on the operator panel, and then click NO on the Check Setup screen. If you see any errors, click YES and follow the instruction.
3.Select Local Installation, and then click Next.
4.Check if the printer to be installed is listed in the Select Printer, and then click Next.
5.Configure the required items on the Enter Printer Settings screen, and then click Next.
6.Select the software to be installed, and then click Install.
7.Click Finish to exit this tool. Wireless Configuration is complete.

When the WPS-PIN operation is successful and the printer is rebooted, wireless LAN connection is completed.

If the selection is WPS-PBC

A NOTE indicates important information that helps you make better use of your computer. NOTE:
WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) is a method to authenticate and register devices required for wireless configuration, by pressing the button provided on the access point via wireless routers, and then performing WPS-PBC setting on the operator panel. This setting is available only when the access point supports WPS.
1.Select WPS-PBC, and then click Next.
2.Follow the instructions until Check Setup screen appears.
3.Confirm there are no errors displayed on the operator panel, and then click NO on the Check Setup screen. If you see any errors, click YES and follow the instruction.
4.Select Local Installation, and then click Next.
5.Check if the printer to be installed is listed in the Select Printer screen, and then click Next.
6.Configure the required items on the Enter Printer Settings screen, and then click Next.
7.Select the software to be installed, and then click Install.
8.Click Finish to exit this tool. Wireless Configuration is complete.

A NOTE indicates important information that helps you make better use of your computer. NOTE:
For WPS-PBC operation on the wireless LAN access point, refer to the manual supplied with the wireless LAN access point.

When the WPS-PBC operation is successful and the printer is rebooted, wireless LAN connection is completed.

I no longer have the Dell 1350cnw Drivers and Utilities CD that came with the printer. Can you tell me where I can get one from. Regards