3 Posts
0
763
SP A I/O module 0 faulted
Model : VNX5600-U
Version : 05.33.000.5.038 / 8.1.1.33
- Clariion Bus 0 Enclosure 0 SP A I/O module 0 : faulted --Incorrect type of device inserted
- Expected type(s) : 8Gb Fibre Bus 0 Enclosure 0 Base Module A : Faulted
- Storage array Faulted Bus 0 Enclosure 0 SP A I/O module 0 : Fault
- I/O module in SP(B) is not the correct type Expected type(s) : 8G Fibre see alerts for details.
- SPB IO module 0 is incorrect found UNKNO expected FC 8G
There is no Fault LED.
Visually, it appears normal.
I need help
Thank you
DELL-Josh Cr
Moderator
Moderator
•
8.5K Posts
0
October 3rd, 2022 06:00
I was not able to find anything that said it was a bug.
DELL-Josh Cr
Moderator
Moderator
•
8.5K Posts
0
September 29th, 2022 06:00
Hi,
Thanks for your question. Did anything else happen in the environment? Have you rebooted the enclosure? You may want to reseat the I/O modules. If that doesn’t work calling phone support is probably the best option.
Let us know if you have any additional questions.
shpower
3 Posts
0
October 3rd, 2022 01:00
Thanks for your reply.
This situation is pending because it is in service.
Or is it a code bug? I've been looking for it, but it's hard to find.
Thanks,