This post is more than 5 years old
3 Posts
0
147765
vFoglight Storage 2.0.2 for 3PAR storage
Hi all,
I would like to ask whether it is possible to add HP 3PAR storage with the latest version of the SAM downloaded straight via the vFolight console.
I found the following KB which states that this was listed as a future enhancement on version 1.6.1 but nothing else...
https://support.quest.com/SolutionDetail.aspx?id=SOL93031&pr=vFoglight Storage
Any help will be appreciated!
Thanks...
DELL-Thomas B
171 Posts
0
February 14th, 2013 18:00
If you are running with a filer head on the 3Par that would explain it. That view does not show the NFS performance statistics, just VMDK based at the present. The data is there, it just is not rendered.
romankarpov
2 Posts
0
February 13th, 2013 14:00
Hi Andrew,
Unfortunately, it is not possible with vFoglight Storage 2.0.2. It is still in the future enhancement category
Thank you
romankarpov
2 Posts
0
February 14th, 2013 14:00
Andrew,
To the best of my knowledge, that should not be the case. This particular chart is driven by VMware metrics, not storage itself.
sammutandrew
3 Posts
0
February 14th, 2013 14:00
Hi Roman,
Thanks for the clarification.
So, does this lack of compatibilty explains also why I do not get any Disk Utilization performance charts under the "Performance" tab of an ESX host?
Thanks
actobit
4 Posts
0
November 30th, 2020 03:00
u can also read the below document about your issue:
HPE 3PAR