Wyse Zero Clients for VMware

Last reply by 10-26-2017 Unsolved
Start a Discussion
2 Bronze
2 Bronze

P25: Firmware update?


can anyone give me a tip on how I can update the firmware of the P25?

Is this also possible with a usb stick?


Replies (4)
2 Bronze
2 Bronze


You must to create an account in Teracci.com

Go to techsupport.teradici.com  and look for:

There is a lot of documentation too in that site.

I suggest to upgrade firmware from PCoIP MC (Management Console). There is two options:

PCoIP MC 2.0 -  to use Wyse P25 5.x firmwares

PCoIP MC 1.10 - to use Wyse P25 4.8 os lower firmwares.

Sorry for my english.

2 Bronze
2 Bronze

hi Jarjona,

thank you very much for your hint.

We have only 10 Zero Clients, there is a simple possibility to update the Firmware?


2 Bronze
2 Bronze

2 Bronze
2 Bronze

sorry but this is obviously wrong, I attach a fast and simple solution here: 

Download the Firmware here:
Wyse P25 / P45 5030/7030 : https://appservices.wyse.com/pages/serviceandsupport/support/downloads.asp
...when needed - Tera Host card: http://support.dell.com 

Connect via Web browser to the Web frontend of P25 and or Tera 2 Card
- Physically connect a management computer (notebook) with the P25 or hostcard
- Set a Fixed IP address on the Notebook: or use DHCP and check the “address leases”

Some steps to find the correct IP-Address in YOUR Environment
- After delivery of new parts these IP-Addresses are valid = Tera Host Karte: Zero Client :
A.- Your can check “the 5030 aka P25” for details:

B.- or check your “DHCP Server” for details:

- insert the IP address of the P25 or hostcard to the address list of the web browser on the management computer

Top Contributor
Latest Solutions