1 Rookie
•
72 Posts
0
2046
PEM640 BOSS card doesn´t exist in BIOS
Hello all,
How to set up BIOS for Boss card ?
Pem640 server, BOSS card+240SSD added .
Picture from Idrac :
Picture from BIOS Device Settings :
No BOSS CARD or BOSS-S1 Configuration Utility.,am I miss something ?
DLOAD
1 Rookie
1 Rookie
•
72 Posts
0
July 19th, 2022 00:00
Hello to all,
thank you guys for help and effort .
As i read a lot of documnetation this card 0F9XF is only for Emc Poweredge C6420.
i think this is the problem .
i need 853XN or WMWJW.
i dont see other explanation .
DELL-Shine K
4 Operator
4 Operator
•
3K Posts
1
July 19th, 2022 00:00
853XN is supported by M640
DLOAD
1 Rookie
1 Rookie
•
72 Posts
0
July 18th, 2022 06:00
Does anyone know setup of BIOS for BOSS cards in PEM640 ?
Dell dont have documentation for this stuff or i didnt found right one .
DELL-Chris H
Moderator
Moderator
•
8.5K Posts
0
July 18th, 2022 07:00
Dload,
The steps needed are outline on page 20 here. This page is specific to the BOSS card installaing and configuration.
Let me know if this helps.
DELL-Shine K
4 Operator
4 Operator
•
3K Posts
0
July 18th, 2022 08:00
Can you share the storage controller and physical disk page from iDRAC? From the screen shot it looks like a PCIe SSD card not a BOSS card. Did you have the picture or part number of the controller
DLOAD
1 Rookie
1 Rookie
•
72 Posts
0
July 18th, 2022 23:00
Hi Chris,
thank you,but as you see I dont see BOSS-S1 Configuration Utility
DLOAD
1 Rookie
1 Rookie
•
72 Posts
0
July 18th, 2022 23:00
PN of controller:7G4YN (PERC H330 Mini Mono Blade 12G)
no hdd´s .
DLOAD
1 Rookie
1 Rookie
•
72 Posts
0
July 18th, 2022 23:00
Morning,
Sure PN is 0F9XF with SSD´´s.
DLOAD
1 Rookie
1 Rookie
•
72 Posts
0
July 19th, 2022 00:00
Hi SHine,
So, as I can see, this card doesn't work, I need a new one?
Can you confirm that we are 100% sure?
Dell-Martin S
Moderator
Moderator
•
3.2K Posts
0
July 19th, 2022 07:00
Hi,
yes 853XN is supported by M640 i checked this again.
Regards Martin
n2ocharged
11 Posts
0
July 14th, 2023 22:00
I love raising dead-threads... but I really wanted to say "Thank you, Dell, for once again creating something that doesn't work and give extremely little or no information about the parts or part numbers needed for your machines".
I can't even begin to think about how much money and time I've wasted buying parts for Dell machines only to find out it doesn't work after days/weeks of troubleshooting and it goes past the return window.
I understand why you do it, however; the bottom line... $$$$$