1 Rookie
•
38 Posts
0
111
Firmware
Is there a way to check a hard drives firmware from CLI?
for example...
#> shellaccess developer
#> disk show
#> disk get 1 <<<< this shows some useful information but i cant find firmware anywhere
I know i can see firmware from the web gui. Any help would be appreciated.
DELL-Joey C
Moderator
Moderator
•
3.1K Posts
0
March 15th, 2024 02:36
Hi,
The only command to grab disk information is the one you have found, disk show or disk get <ManagedObjID#>. It would both show the same information you have mentioned. There isn't a more indepth command.
DELL-Charles R
Moderator
Moderator
•
3.4K Posts
0
March 14th, 2024 19:57
Hello,
What system are you working with?
I assume by your user name it is SC9000 but I wanted to confirm.
Have you tried
#> show disk
sc9000nerd
1 Rookie
1 Rookie
•
38 Posts
0
March 14th, 2024 23:01
@DELL-Charles R currently i am working with a SCv2020 SCOS 7.4.21 but i do also have a sc9000 with SCOS 6.4.
show disk does not work in the CLI terminal. "Disk Show" does work but it does not produce disk firmware the columns are as follows:
index, name, managementDiscipline, operstatus, health, parentfolder Class, total blockcount, rightsized blockcount unallocated blockcount, disksize, logicalsectorSize, phyiscalSectorSize.
is there perhaps a more specific command i can use to get a single disk firmware?