28 Posts
0
1024
New Batteries on SCv2020
Hi Folks
I replaced the batteries 3 days ago on my SCv2020, however, the message still showing.
After replaced no messages sows that the batteries were replaced, is that correct?
Is there anything that I need to do to SCv202 recognize new batteries?
Thank you
Praveen.Singh
3 Apprentice
3 Apprentice
•
412 Posts
0
March 11th, 2023 07:00
check on CLI
"cha battery show"
or a clean reboot will fix it, do share the latest update or accept the POST as solved if your query is answered.
DELL-Chris H
Moderator
Moderator
•
8.5K Posts
0
March 17th, 2023 11:00
It would depend on your configuration, but I would suggest to do so.
DellEMCSupport
Moderator
Moderator
•
631 Posts
0
March 10th, 2023 10:00
WRcariflex,
While it could be that you need to reboot, what you can also do, in order to get more information, you can run "platform bmc battery display 0" and "cha battery show" to check the charge on the batteries.
Let me know what you see.
WRcariflex
28 Posts
0
March 10th, 2023 11:00
Thank you for the answer. However, are these text a command line?
DELL-Chris H
Moderator
Moderator
•
8.5K Posts
0
March 10th, 2023 11:00
I apologize, I thought i had stated that, yes they are CLI commands.
WRcariflex
28 Posts
0
March 17th, 2023 10:00
Hi Folks
Below the command result "cha battery show" and the command "platform bmc battery display 0" not exists look picture below.
Do I still need to reboot the Storage? If yes, Is there a CLI to do that instead to shut it down?
Thank you
WRcariflex
28 Posts
0
March 17th, 2023 11:00
Understood. Is it better to shutdown all VMs first, right?
DELL-Chris H
Moderator
Moderator
•
8.5K Posts
0
March 17th, 2023 11:00
You should be able to just using the gui, it would be under Actions-System-Shutdown/restart. That would be the easier route.