Start a Conversation

Unsolved

K

29 Posts

1997

December 15th, 2021 08:00

BIOS not update by SCCM

Hi 

i try updating BIOS on Dell 3070 from 1.7.1 or 1.10.0 to 1.11.0 throught SCCM application.

command is this :

OptiPlex_3070_1.11.0.exe /s /r /l=C:\temp\bios1111.log /p=****

Command run , all looks OK computer restart and BIOS stay in old version.

There is log :


**************************************************
***Dell Firmware Update started on 12/14/2021 at 11:36:27***
Command: C:\WINDOWS\ccmcache\88\OptiPlex_3070_1.11.0.exe /s /r /l=C:\temp\bios1111.log /p=

SMB Table Address:1739ca0:148e
WSMT Supported: Using WMI commands.
Registry creation is Success at \SOFTWARE\DELL\FirmwareUpdate
Dell Firmware Update Utility Version: 4.2.24


------------------------------------------
Gigabit Ethernet : Current Version:BCD:0.1: --- New Version:BCD:0.1
System BIOS with BIOS Guard [V0]: Current Version:BCD:1.7.0: --- New Version:BCD:1.11.0
Intel Management Engine (Non-VPro) Update: Current Version:BCD:12.0.71.1681: --- New Version:BCD:12.0.81.1753
Bios Connect Exe Payload: Current Version:BCD:0.1.16.0: --- New Version:BCD:0.1.16.4
Bios Connect Exe Version: Current Version:BCD:0.1.16.0: --- New Version:BCD:0.1.16.4

------------------------------------------
Located the dedicated image or no dedicated image requested for this system.

Exit Code = 6 (Rebooting System)
***BIOS flash finished at 12/14/2021 at 11:36:54***

Where is problem ?

 

1 Message

June 28th, 2022 06:00

Same problem here, have you found a solution?

Looks like everything is fine, although the BIOS version remains the same.

**************************************************
***Dell Firmware Update started on 6/23/2022 at 13:20:25***
Command: C:\Program Files (x86)\DesktopCentral_Agent\patches\1410732-Latitude_5X00_Precision_3540_1.17.1.exe /s /l=bios-upd.log /f

SMB Table Address:13ea4a8:1a52
WSMT Supported: Using WMI commands.
Registry creation is Success at \SOFTWARE\DELL\FirmwareUpdate
Dell Firmware Update Utility Version: 4.2.19


------------------------------------------
Gigabit Ethernet : Current Version:BCD:A00: --- New Version:BCD:A00
System BIOS with BIOS Guard: Current Version:BCD:1.16.1: --- New Version:BCD:1.17.1
Embedded Controller : Current Version:BCD:1.0.22: --- New Version:BCD:1.0.22
Backup Embedded Controller: Current Version:BCD:1.0.0: --- New Version:BCD:1.0.0
Intel Management Engine (VPro LP) Update: Current Version:BCD:12.0.85.1869: --- New Version:BCD:12.0.90.2072
Main System TI Port Controller 0 : Current Version:BCD:20.0.0.5: --- New Version:BCD:20.0.0.5
Bios Connect Exe Payload: Current Version:BCD:0.1.16.0: --- New Version:BCD:0.1.16.0
Bios Connect Exe Version: Current Version:BCD:0.1.16.0: --- New Version:BCD:0.1.16.0

------------------------------------------
Located the dedicated image or no dedicated image requested for this system.
/f command-line is used. Do RBU

Exit Code = 2 (Reboot Required)
***BIOS flash finished at 6/23/2022 at 13:21:19***

 

Previous attempt:

**************************************************
***Dell Firmware Update started on 6/20/2022 at 10:43:03***
Command: C:\Program Files (x86)\DesktopCentral_Agent\patches\1410732-Latitude_5X00_Precision_3540_1.17.1.exe /s /l=bios-upd.log /f

SMB Table Address:154a4a8:1a52
WSMT Supported: Using WMI commands.
Registry creation is Success at \SOFTWARE\DELL\FirmwareUpdate
Dell Firmware Update Utility Version: 4.2.19


------------------------------------------
Gigabit Ethernet : Current Version:BCD:A00: --- New Version:BCD:A00
System BIOS with BIOS Guard: Current Version:BCD:1.16.1: --- New Version:BCD:1.17.1
Embedded Controller : Current Version:BCD:1.0.22: --- New Version:BCD:1.0.22
Backup Embedded Controller: Current Version:BCD:1.0.0: --- New Version:BCD:1.0.0
Intel Management Engine (VPro LP) Update: Current Version:BCD:12.0.85.1869: --- New Version:BCD:12.0.90.2072
Main System TI Port Controller 0 : Current Version:BCD:20.0.0.5: --- New Version:BCD:20.0.0.5
Bios Connect Exe Payload: Current Version:BCD:0.1.16.0: --- New Version:BCD:0.1.16.0
Bios Connect Exe Version: Current Version:BCD:0.1.16.0: --- New Version:BCD:0.1.16.0

------------------------------------------
Located the dedicated image or no dedicated image requested for this system.
/f command-line is used. Do RBU

Exit Code = 2 (Reboot Required)
***BIOS flash finished at 6/20/2022 at 10:43:57***


************************************************** 

 

Moderator

 • 

25.3K Posts

June 28th, 2022 06:00

Hello, I see you are looking for technical assistance. If you need our help, you can start a private/direct message with us and we will be happy to assist you.

29 Posts

June 28th, 2022 21:00

Hi 

We trying but dont have resolutiob for this.

Other models working fine.

This support say, we must update devices by USB key LOL GREAT HELP.

 

9 Posts

January 6th, 2023 06:00

Having the same issue with loads of 7420, BIOS 1.21.0

 


**************************************************
***Dell Firmware Update started on 12/5/2022 at 9:15:20***
Command: C:\ProgramData\Dell\UpdateService\Downloads\FOLDER09096327M\1\Latitude_7X20_1.21.0.exe /s /l="C:\ProgramData\Dell\UpdateService\UpdatePackage\log\Latitude_7X20_1.21.0.txt" /p=

SMB Table Address:b7b908:18a4
WSMT Supported: Using WMI commands.
Registry creation is Success at \SOFTWARE\DELL\FirmwareUpdate
Dell Firmware Update Utility Version: 4.2.53


------------------------------------------
System BIOS with BiosGuard: Current Version:BCD:1.20.0: --- New Version:BCD:1.21.0
Intel Management Engine Corporate Firmware Update : Current Version:BCD:15.0.42.2235: --- New Version:BCD:15.0.42.2235
Integrated Sensor Hub: Current Version:BCD:5.4.1.4456: --- New Version:BCD:5.4.1.4456
Embedded Controller : Current Version:BCD:1.0.18: --- New Version:BCD:1.0.18
Backup Embedded Controller: Current Version:BCD:1.0.0: --- New Version:BCD:1.0.0
BiosConnect Core FV : Current Version:BCD:2.19.2: --- New Version:BCD:2.19.2
BiosConnect Wireless FV: Current Version:BCD:2.19.2: --- New Version:BCD:2.19.2
Intel TBT Retimer : Current Version:BCD:0.2.17: --- New Version:BCD:0.2.17
Intel TBT Retimer 2 : Current Version:BCD:0.2.17: --- New Version:BCD:0.2.17

------------------------------------------
Located the dedicated image or no dedicated image requested for this system.

Exit Code = 2 (Reboot Required)
***BIOS flash finished at 12/5/2022 at 9:16:11***

 

29 Posts

January 8th, 2023 21:00

In last BIOS we have problem on 3410 and 5400 this Dell is real unusable for enterprise.

July 19th, 2023 11:00

Did you ever find a solution to this?

29 Posts

July 19th, 2023 22:00

No. I open ticket to dell, and this end with "take USB and update it if this work its OK".

This dell support is real pain.

No Events found!

Top