1 Rookie
•
2 Posts
0
25
PowerEdge T320 - No Boot, No Bost, No Display
Hi All,
I have an old T320 which is having the below Issues, Just trying to confirm whether it might be a board issue
-No Display on Embedded VGA or Graphics card
-No Post (Even with Minimum Requirements for Post)
-No Beeping when ram removed
-CPU Internal Error
- Constantly Power cycles on and off
PSU Light is Green
I have tried updating BIOS and via IDRAC but it fails everytime.
DELL-Chris H
Moderator
Moderator
•
8.5K Posts
0
May 8th, 2024 12:45
Pauls89,
The T320 minimum to post is removing everything internally and externally but the following.
If under that configuration the server still fails to start then it is likelt one or more of the iteams listed above. I would suggest trying them with known good parts individually until you identify which is causing the issue.
DELL-Young E
Moderator
Moderator
•
3.7K Posts
0
April 21st, 2024 23:21
Hello, thanks for choosing Dell and welcome to our community. Please have a look at this old post.
https://dell.to/3UvlvLO
Respectfully,
Pauls89
1 Rookie
1 Rookie
•
2 Posts
0
May 8th, 2024 12:23
@DELL-Young E I have since swapped the motherboard with another working one and have the same issue.
Could this be a CPU or PSU failure ?