1 Rookie
•
3 Posts
0
76
DELL T150 RAID 1 PROBLEM
I have a poweredge t150 server, i installed raid 1 (2 HDD 0-1) and window server 2019 boots normally.
I tried to fault tolerance by removing the hdd 1 when i turned server off. When I turned it back on, there was an error "uefi0116 One or more boot drivers have reported issue(s)" but the operating system still started normally.
I have re-inserted this hdd 1, but the error message still occurs
What should I do? I tried adding a "hot spare" hard drive, but it didn't work?
please help me How to rebuild raid 1, thank you
ApacheVN
1 Rookie
1 Rookie
•
3 Posts
0
April 3rd, 2024 04:02
After 1 day, it's ok and don't throw any error, it auto rebuild on dell background but can't see the progress
hnyr28
4 Operator
4 Operator
•
229 Posts
0
April 1st, 2024 13:32
Please refer to the following page！
How to Import a Foreign Configuration in the RAID Controller Using the System Setup Menu | Dell Australia
ApacheVN
1 Rookie
1 Rookie
•
3 Posts
0
April 1st, 2024 15:24
Hi, My dell t150 server doesn't have those options