Unsolved
1 Rookie
•
4 Posts
0
32
Powerstore 500T snmp not working
Hello
I need to monitor a storage powerstore 500t by snmp, I configured the snmp server ip, version 2c, port 162 and community, but when testing the server does not connect by snmp to the storage, but if there is network connectivity between both.
Any way to know if the port 162 in the storage is open or how to open it.
Thanks very much for your help
Regards
Origin3k
4 Operator
4 Operator
•
1.8K Posts
0
April 13th, 2024 11:42
Powerstore only support SNMP Traps and not simple SNMP "get". So you need a SNMP Trap receiver on your "Server" and the PowerStore MIB for translating.
Regards,
Joerg