Search Results (3.4K)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
I've been using a U2720Q monitor for 2 years with a MacBook Pro 2019 16' T2 connected with USB-C. About a week ago, the monitor shows this message when I connect the monitor to the MacBook: NO USB Type-C from your device and battery charging still works. I've been in touch with Dell. My product is
Question
•
Monitors
Official Solution
Closed
Curious if the new U3425WE supports any kind of adaptive sync, specifically over DP (or using the TB4 DP alt mode)? It seems like it doesn't list the branded versions from either nVidia (GSYNC) or AMD (Freesync) but will the monitor automatically adjust its refresh rate with software that supports i
Question
•
Monitors
Community Accepted Solution
Closed
No usb-c signal with a Macbook Pro 16' 2019 T2. Monitor was working fine for 2 years but a few days ago, impossible to use the usb-c port. Same issue with different usb-c cables and other computers (PC/Mac). It works with HDMI. I've tested usb-c cable with other brand monitors and it works. My Macbo
Question
•
Monitors
Community Accepted Solution
Hi all I am hoping that someone is able to help with an issue that we're seeing with the above monitors.We recently purchased 150 of each of these monitors, and have experienced issues with the S2421HN monitor waking from sleep when daisy chained.This is replicated 100% of the time, across any of o
Question
•
Monitors
Community Accepted Solution
U3423WE and U3425WE Are these both true 10-bit panels or 8-bit + FRC?
Question
•
Monitors
Community Accepted Solution
G3223Q cannot see activation of blue light filter mode. Firmware is updated, software is installed but i used to use dell S2721DGFA model, which can I do these things. Could you please help me?
Question
•
Monitors
Community Accepted Solution
Hello,My monitor has horizontal lines running across it. My operating system is macOS Venture 13.4.1 and the steps I've taken for resolution are: Default Reset (did not work) Diagnosis Lines were not visible on Green & Red but were all other times (and of course when unplugged from my
Question
•
Monitors
Community Accepted Solution
Hi, I bought a new monitor: the U3425WE with integrated hub. Awesome monitor! Before this, I had a WD19 dock, with 2 x P2720DC monitor. Now my new setup, as I want it to be: U3425WE with USB C to my laptop, and Thunderbolt4 cable to P2720DC. For some reason, the P2720DC doesnt work. Any idea how I
Question
•
Monitors
Community Accepted Solution
The documentation for DDM 2.x, states ="The Network KVM is only available for selected monitors that support this function"Which Dell Monitors support DDM 2.x Network KVM feature? We want to disable Network KVM feature. When installing DDM 2.x for our fleet, can I specify in the command line DDM 2.x
Question
•
Monitors
Community Accepted Solution
Hi, I have 2 computers connected to a Dell U3223QE monitor: MacBook Pro 16 2019 running ventura. It connects to the monitor to port 5 - USB-C port see the bottom view here : https://dl.dell.com/content/manual12003775-dell-u3223qe-monitor-user-s-guide.pdf?language=en-us . PC running Pop!Os 22.04L
Question
•
Monitors
Community Accepted Solution
Closed
Purchased this monitor for the speakers/cam. What is driving me batty is that I cannot find anything to pin to the toolbar for volume control. You have to manually touch the front of the speaker, and THEN a volume slider pops up on the screen. Alternatively, you can reach around for the 'joystick'.
Question
•
Monitors
Community Accepted Solution
Hi Everyone. I have a new U2724DE which is connected to power and has the provided USB-C thunderbolt 4 cable connected to a Surface Pro 8 running Win11. I have an issue when the Surface Pro goes to sleep, the monitor may not be detected when it comes out of sleep. The monitor polls the Surface Pro
Question
•
Monitors
Community Accepted Solution
I have recently connected 2 PC's to my dell monitor U4323QE. One is Windows 11 and one is Windows 10 x64. Dell Display Manager seems to be working fine with the Windows 11 PC. However, when I install Dell Display Manager on Windows 10 x64, it installs successfully but does not open for some reason.
Question
•
Monitors
Community Accepted Solution
About 3 or 4 hours into using for the first time, my S27722QC monitoring has decided to intermittently work. The screen goes blank/black for a few seconds, the timing seems random and sporadic, and varying durations. I have downloaded the Dell Display Manager and it's telling me that the drivers are
Question
•
Monitors
Community Accepted Solution
This applies to various Dell LCD monitors from the 2010's. "The display will go into Power Save Mode in 5 minutes."
Question
•
Monitors
Community Accepted Solution
Closed
There’s a new firmware update for the G3223Q (M3T104). But it's only available via DDM (Dell Display Manager) app and it's not present in Dell site or monitor's driver page. Is there any info of what it does / introduce or improve? Thank you in advance! Note: also I think there is a bug in DDM 2.
Question
•
Monitors
Official Solution
I purchased two Dell monitors (S2421HS) together from the Dell store. They have the same batch number, but there is a slight color difference between them. One appears a bit reddish, and the other is a bit yellowish. Is this a technical fault, and is there a solution for it?
Question
•
Monitors
Community Accepted Solution
I have a U2723Qe, an HP Elitedesk PC with a Radeon R7 430 graphics card with 2 DP out, and a Dell Inspiron 3020 Desktop with a NVIDIA® GeForce RTX 3060. Only one displayport seems to be working. The HDMI works, one DP works, but when I change the cable to the other DP it does not work. I cannot set
Question
•
Monitors
Community Accepted Solution
Hi, I purchased Dell Slim Conferencing SB522A soundbar to use it with my monitor Dell U2422H. I connected it to USB port directly in monitor (as requested). LEDs (both on left and right side) are functional but the device itself isn't recognized by operational system, I useWindows 10. Please help me
Question
•
Monitors
Community Accepted Solution
Hello,I have a DELL S2722QC monitor which I connect to a MacBook M1/M2 Pro through an HDMI cable. I am considering buying a U2723QE monitor to daisy chain with the first monitor.I would like to daisy chain in the following order: MacBook Pro TB/USB-C out port --> U2723QE USB-C to USB-C cable --&g
Question
•
Monitors