Search Results (394)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
Trying to do a very basic memory test when booting up a R410. I have installed 16GB DDR3 1066mhz modules. During booting it's reading the GB correctly, but it's saying 800mhz????? Am I not getting full speed? Have they been configured differently? These were clean pull modules. Help pleas
Question
•
PowerEdge OS Forum
Community Accepted Solution
I have a Dell T310 with SBS 2008 that I plan to upgrade from an S300 controller to an H700 controller. I plan to:1. Mark and pull the current drives and S300 controller.2. Install the H700 and set up a 2TB disk as a RAID-0 and restore to it to make sure the backups work.3. Remove
Question
•
PowerEdge OS Forum
Community Accepted Solution
Hi Guys, I was wondering if someone can help me out choosing setup for my home server (software wise). I just upgraded my PE860 to PE2950 III. On PE860 I had Windows Server 2012 Essential but since my school is giving me all MS software for free I was thinking about going with Windows Server 2012
Question
•
PowerEdge OS Forum
Community Accepted Solution
I recently got a used PowerEdge 1850 (BIOS version A04) without an OS, with plans to install Ubunutu Server. I read that you can boot from a USB flash drive to it, so I used a tool to make an 8 GB USB 2.0 flash drive bootable to install the OS. I set the USB drive emulation to auto, and the USB cont
Question
•
PowerEdge OS Forum
Community Accepted Solution
I have a PowerEdge T420 and am trying to install the operating system. I have configured everything through the Lifecycle Configurator. When I get to the option to deploy the OS, an error comes up saying "Unable to Retrieve the list of supported operating systems (SWC0015). I have done the Firmware
Question
•
PowerEdge OS Forum
Community Accepted Solution
Hello, As we are planning to deploy the customized version of ESXi 5.5, I would like to know if this is the latest one: http://www.dell.com/support/drivers/in/en/19/driverdetails?driverid=20VNP Thank you!
Question
•
PowerEdge OS Forum
Community Accepted Solution
Hello I have a Dell R720 server, after configuration RAID 5 by Disk Management and setup windows 2008 server r2 sp1 . i tried to reboot from windows 2008 server r2 sp1 cd . When attempting to do a full restore, winre sees the backup image but does not see any hard drives to target for the res
Question
•
PowerEdge OS Forum
Community Accepted Solution
Does anybody know if it is possible to remotely update the bios of a R620 (with iDrac Express) running Ubuntu 12.04.3. I have performance issues with the Intel E5-2630 CPU's and read that it might be solved updating the bios to the latest version: BIOS_T2RVC_LN_2.1.3.BIN I
Question
•
PowerEdge OS Forum
Community Accepted Solution
Hello! We bought a server PowerEdge 720. Is it possible to find a driver for network card "Broadcom Netxreme BCM 5720" for Windows 2003?
Question
•
PowerEdge OS Forum
Community Accepted Solution
Hi Everyone! I do not know Moren help me, my DELL PowerEdge T110 II serverbecause the use of a test software, you need to install SEVER2003 32-bit system, using the onboard RAID card, two 500G SATA hard drive, I do not know what method of installation to make the machine does not blue scree
Question
•
PowerEdge OS Forum
Community Accepted Solution
Dear Sir/s, I am trying to reformat the server but when I go to OS Deployment, it was said that drivers are not available. Please help. Regards, Mysh
Question
•
PowerEdge OS Forum
Community Accepted Solution
I have 2 Servers PowerEdge R720, and I am trying to install windows server 2008. I used the windows drivers, and when i got hard dive screen i did not it please i need help
Question
•
PowerEdge OS Forum
Community Accepted Solution
Hi guys, Trying to set up a PE1800 with dual primary partitions one with 2003 SBS SP2 (OEM) and a second partition with 2008 Server Standard Retail). Any tips on how to do this using Open Manage as to install all drivers upfront? Second question, would either OS see a common extended partition?
Question
•
PowerEdge OS Forum
Community Accepted Solution
Dear Sir, I just had this T320 and my problem now is i dont have any cd's, drives, manuals, etc. coz they shipped this from china. I tried to follow all instructions but failed to find the 2 500HDD installed (Dell Constellation). Please help me to run the system. I tried ATA AHCI RAID and so on b
Question
•
PowerEdge OS Forum
Community Accepted Solution
Hi all, Does anyone know if the R610 is compatible with the VMware ESXi 5.1 Update 1 Recovery Image ? It's not on the compatibility list but the R620 is there. We use both servers in our VMWare environment and I'm keen to update to 5.1 U1. Thanks in advance! Lee
Question
•
PowerEdge OS Forum
Community Accepted Solution
It was connected with other computers in an office setting and now it is only for single use at home. Local area connection shows connected, IP address still shows the old IP address and I cannot change it to my ISP's IP address, in the control demand It gives me the response after I try
Question
•
PowerEdge OS Forum
Community Accepted Solution
I have PowerEdge T110 II with RAID 1 created. The disk0 has failed. At the moment only disk1 is running. I would like to replace disk0 with a new harddrive and make it mirrored (raid1) with the disk0. How do i rebuild Raid1 ??? I've been searching f
Question
•
PowerEdge OS Forum
Community Accepted Solution
Hi, I have 4 X Dell R210 (Gen11) servers with iDrac 6 express (no console available). I have updated the BIOS, System Services Console and deployment drivers to the latest versions via the DRAC and System Services console. I have been able to install Windows Server 2012 on 2 of t
Question
•
PowerEdge OS Forum
Community Accepted Solution
Looking to switch over from my current VM setup to a baremetal VM setup and I'm trying to figure out the latest version of ESXi that will work on my PE 860, and if there is anything in particular I need to do to make it work.I found the Dell custom ESXi files but I don't know if I should use those v
Question
•
PowerEdge OS Forum
Community Accepted Solution
I am after some advice for setting up a T310 for vitualisation in a very small network. I am setting up a R200 as the main server. The hardware is single X3320, 8Gb RAM + 2 x 250GB disks RAID 1 on SAS6iR controller. The software will be SBS 2008 premium setup as PDC, AD, DNS and will have Exchange
Question
•
PowerEdge OS Forum