Search

I can mount a U2 SSD hard drive for the server R640 ?

Hi Folks Someone could tell me some tips why my Storage doesn´t shows as Available Storage for activate CSV on my volume? Is there any configuration in Storage that I need to do to become available and shows the option in failover cluster? Thank you  

Hi Does Storage 5024 need a license? Thanks

Hi Folks We have a SCv2020 and I need to migrate all VMs to ME5024. I am implementing the ME5024 however I have some questions. 1- Must I create 2 Pools - A and B or I can use only one pool? What is the impact of this? 2- Which RAID are more indicate when I create the Pools? 3- I have 13 HDs wh

Hi We have a new ME5024 , in panel HTML through IP , in setting, network, we have Certificate section. Could somebody tell me what is it ? Do we need any certificate for this new storage? We have a ME4024 as well but that doesn't have this option

Hi we have one ME4024 which already has one expansion enclosure ME424. Now we need to add 2 extra ME424 Expansion to have total 3 expansion enclosure. I have these questions: 1- shall I use reverse cabling method ? as the current cabling in normal one 2- or I could use normal cabling ? 3- when I

      "Connectivity to this host is lost. You must map using at least one port on each controller that is physically connected to each host."

ME4024 with 11x 1.92TB SSDs, one spare, the remaining 10 drives in RAID6. Usable capacity - 15+TB. Yet VMware only sees it as a 10.9TB volume: What are we doing wrong? Thanks!  

I'm running an r620 with esxi, connected to an MD1200 running RAID6, connected via perc h800I need to add more storage and have 2 more MD1200s.My question is more on 'how'.Can I just chain the 2 new enclosures full of drives to the current, power them all on, then expand my RAID6 via OMSA somehow?An

Hi, we are currently trying to get one of 2 MD3860i units back in service. The devices were running without problems until shutdown. The data on the HDDs/SSDs was deleted, but we got the IPs and actually a password. We can connect to the device with the MDSM and it shows us that it is in recovery

Hello, We don't know md3820f password thereforce i will reset password but I am not sure something information on the datasheet. when i will reset password on the controller switch button, is all erease configuration or just only password reset ? thanks a lot.       

Hello, I have two challenge keys, we need to reset the password of our iSCSI brigde cards of Powervault TL2000. Can someone help us please? 6VVMVJHGX94 6VBB8P02573 Thanks in advance.

I've got a TL2000 with a single LTO-6 HH drive. They are hosted by an R805 server via 6Gbps SAS HBA. I'm looking to add a second LTO-8 HH drive. Will it be compatible given the HBA is only 6 Gbps given that I'm reading the LTO-8 requires a 12 gbps SAS. Are there 12 Gbps SAS HBAs compatible with R805

Hello, I got warnings from the console of a powervault md3200i of a customer. Both raid controllers batteries need to be replaced, but I was unable to find a website where I can buy new batteries for the powervault in Europe. Dell support website doesn't help. Any advice appreciated. Nick

We've got 2 PowerVault MD3600f SANs that have previously only been connected to 2 different servers via Fiber only without any of the Ethernet management ports being used. We want to use the 2 SANs (properly this time) using a Fiber switch to connect to 2 servers we are going to cluster. I'm new t

Hey guys, I'm not sure how to connect and define the iSCSI IPs in a scenario with 2 hosts with 2 ports each, directly connected to the ME5.In the deployment guide (https://dl.dell.com/content/manual51896558-dell-powervault-me5-series-storage-system-deployment-guide.pdf?language=en-us), it shows the

I have an old Dell storage with 480G hard drives. What if I repalce the old ones with larger disk, not at the same time? Say I only replace 2*960G at a time. And when I repalce all the old ones, will the total space be expanded or I still get the space with 480G drives? In addition, the old ones are

Hi, Does anyone know if its possible to upgrade the base ME4012 that uses the SAS ports to ISCSI controller? Thanks in advance.

Hey all - I guess I'm hitting a bit of a roadblock. I'm unable to see the virtual disks I've configured over fiber channel from my virtualization cluster. I've created a host group containing the three hosts in our virtualization cluster, and each host is (obviously) attached to its respective WWN

Hello, I'm currently trying to understand the way to make my ME4024 iscsi array balanced and avoid problems in the future. I have this conf with 2 POOLS (conf suggested by the system during the configuration of the array): POOL A : RAID 6 -> 15,5 To POOL B ; RAID 1 -> 3,7 To I needed only