Search Results (745)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
Hello and thank you for you insights, I have a PVE cluster and i want the volumes on ME4024 to be handled by multipathing on the cluster. I configured my controllers like this : And configured 2 SAN switches with 2 separate non routed private vlan as suggested by Vendors. On PVE i declared
Question
•
PowerVault
Community Accepted Solution
Dear All, I have 1 x backup server and 2 x esxi servers attached to ME5024 via FC, and inside ME5024 i attached 3 volumes for all 3 hosts, but when i check in esxi, i only see 2 volumes, any idea ? Keith
Question
•
PowerVault
Community Accepted Solution
Hi everyone, Our SAN fired off two TEMP SENSOR alerts, but said they were UNKNOWN. There were no lights on the rear, but I rebooted one power supply and the errors are now gone. Would I be able to upload the logs to someone for review, I'd rather avoid any surprises. Thanks in advance!
Question
•
PowerVault
Community Accepted Solution
Closed
Hi Community,Did anyone seen an issue when TOSHIBA PX02SMF080 SSDs all went into communication loss status on Scale-Out? Other drives on the same controller, and disk tray is still functioning, even other type of Toshiba SSDs. It's an MD3060e. Thanks a lot in advance.
Question
•
PowerVault
Community Accepted Solution
If an ME4084 is purchased with 28 drives (i.e. 1 full row in each drawer), are the empty drive bays in the two drawers populated with empty drive carriers or blanks? The documentation indicates that the DDICs are shipped separately so it doesn't sound like it, but I wanted to check. Thanks.
Question
•
PowerVault
Community Accepted Solution
I'm wondering if iDRAC is available to older model like Power Vault? Or is this feature only limited to Power Edge / Compellent.
Question
•
PowerVault
Community Accepted Solution
Hello, I am wondering, what is the impact of write performance degradation, if we don't follow general rule of "power of 2"? We have 12 disks and we want to create RAID 5 from all of them (11+1). But storage tells us that optimal number of disks for RAID 5 is 3, 5 or 9. Thank you
Question
•
PowerVault
Community Accepted Solution
Hi everyone: I would like help with the following: How can I modify or expand a volume on the ME4012? Is there a problem with the information or with the VMs that are in the volume to be modified?It should be said that the volume is of the virtual type. Regards,
Question
•
PowerVault
Community Accepted Solution
Dear All, I have a Dell 650xs server with 2 SAS card connecting to MD1420, and just wonder how do i configure the raid setting on MD1420 ? is it from the Dell 650xs bios ? or there is a software to do it ? any help would be appreicated Keit
Question
•
PowerVault
Community Accepted Solution
Hello can you pls provide me the reset code to set back the password that got lost (or isn't accepted as documented) on last change. A reset of the TL2000 itself didn't help. My Challenge Code is 4NNF8DWH155
Question
•
PowerVault
Community Accepted Solution
Hi I have a ME4024 with 4 drive slots left that I wish to populate with Dell branded 3.84TB disks. The other 20 slots are taken by 900GB drives already. I believe I have read that this is possible - can some please advise. Kind regards TopKat
Question
•
PowerVault
Community Accepted Solution
Just wondering if anyone has added an additional tray to a production ME4024 array while online?We have a production ME4024 which we had installed with 2 trays of expansion disks M424 and M412.We need to add an additional M412 for expansion, but just noticed in the manual:----------------------NOTE
Question
•
PowerVault
Community Accepted Solution
In the admin guide for the ME4 series it says "You cannot expand the base volume of a snapshot tree or any snapshots in the tree." From this statement it sounds like a volume that has snapshots cannot be expanded unless those snapshots are first deleted. Am I correct? In the admin guide for the ME5
Question
•
PowerVault
Community Accepted Solution
Hey all - I was just wondering, looking at the Administrator's Guide for these devices I'm uncertain if it's necessary that I connect ALL of the fiber channel ports to our fiber channel switches in order to gain functionality and redundancy - mostly because I'm not sure we're "licensed" for enough
Question
•
PowerVault
Community Accepted Solution
I REQUEST HELP TO IDENTIFY HOW TO CONNECT AN ML3 WITH 2 SAS DRIVES TO A SINGLE DELL SERVER. CURRENTLY ON THE DELL SERVER THERE IS ALREADY A TWO-PORT SAS CARD. IS AN ADDITIONAL SAS HBA REQUIRED ON THE SERVER TO CONNECT THE SECOND DRIVE?
Question
•
PowerVault
Community Accepted Solution
ME5024 snapshots are created daily and scheduled for 7 archiving.I'm curious about the snapshot capacity display.It looks the same as the original volume, but is it correct that the snapshot capacity takes up to the same amount?Or does it only take up as much as Unique Data? # show volumesPool Name
Question
•
PowerVault
Community Accepted Solution
Hello, I have md3800f device.There are 2 management modules, one of them opens and the other does not.LU and 03 error code appear on the module that does not turn on.Also, controller power led and battery icon are constantly on, I can't connect to the module via the console, the other module is work
Question
•
PowerVault
Community Accepted Solution
I'm trying to understand the differences in terms of R/W IOps and life span in TB for the following SSD options available in ME storage. I haven't been able to find the tech specs GF82IO4: 1.92TB SSD SAS ISE Read Intensive 12Gbps 512 2.5in Hot-plug AG DriveGL62XHQ: 1.6TB SSD SAS
Question
•
PowerVault
Community Accepted Solution
Hello, I have been using the mtx command, under Rocky Linux 8, to operate a ML£ tape library with two SAS LTO drives The relevant generic SCSI devices are shown by the output of lsscsi .: [1:0:6:0] tape IBM
Question
•
PowerVault
Community Accepted Solution
Hello I'm trying to update the disk firmware via ME4012 PowerVault ManagerThe disk are: ST4000NM017AI downloaded the firmware from here: https://www.dell.com/support/home/it-it/drivers/driversdetails?driverid=wtx15 I tried to update with both the extracted windows version (CSJA.fwh) and the linux o
Question
•
PowerVault