Search

Hello, I have a PowerVault 124T autoloader and I cannot log into through the web console. When I try, I get the following code **45595** Can someone help me identify which username and temporary password to access? Thanks!

I have an MD1420 connected to an R740 running Windows 2016 server. The C drive is on 2 mirrored drives on the server. I have 2 data drives - one on the internal R740 disks (S drive) and one on the MD (G Drive). I have 4 TB of disk space free on the 740 internal disks that I'd like to use to extend t

Hello, I have an ME4024 when I go into the web interface and click on Performance at the bottom left. The page that comes up says no data available.  The system has been up and running quite happily for 4 months now.  No matter what I pick in the show list Disks, Controllers, Volumes or

I have a PowerVault 124T autoloader and I cannot log into through the web console. When I try to log in, the "#" is ** 53692 **. Thank you!

Hello, In the Dell EMC PowerVault ME4 Series Storage System documentations I found the following statements: "Virtual storage provides the foundation for data-management features such as thin provisioning, automated tiered storage, SSD read cache, and the quick rebuild fea

Hello, Currently we have the following configuration: ME4084 (28 disks in total) with two Virtual pools with one Virtual disk group (14 x 3.5" HDD 7k 512n ADAPT) in each pool. 14 disks are installed in the top drawer and 14 in the bottom drawer. We are going to expand our virtual disk gro

Hi~ how to add Storage(MD1400) to H830 RAID Adapter (in this case)?    AS-IS Front Server : PowerEdge R930  HBA : H830 RAID Adapter Storage : MD1400 #1 MD1400 #2 block devices list :  sdc 8:32 0 54.6T 0 disk└─sdc1 8:33 0 54.6T 0 par

We've had a TL4000 for years with two LTO6 drives and we've used some label sets ######L4 and ######L6 without any major problems. Two weeks ago, out of the blue, all tapes with labels ######L4 were marked as Gen4 and as read only. Can anyone tell me how to fix this or where can I find the label c

Hi,I have EMC ME4012, PowerEdge R740 ESXI 7.0 and one QNAP QSW-1208-8C-US 12-Port switch unit with an RJ45 and SFP+ network interface as network management. I install inside Dell R740 Q Logic 57810S SFP+/DA Card. please help how are the configuration steps and what should I prepare to configure, t

Hello, I have a question because I can't find the answer anywhere. What is the maximum disk capacity it will support? For example with the H810 controller?

I have a PowerVault 124T autoloader and I cannot log into through the web console. When I try to log in, the "#" is ** 60935 **. Thank you!

we have a 12 bay R510 server running VMware ESXi 6.0.0 build-2809209, (no OMSA installed) In the Perc H700 Bios raid controller menu I see internal drive 13 as failed.I have a replacement disk but before i swap out i would like to know which is the correct way: turn off the server and replace AND

Good morning, We have a PowerVault MD3200 with the bottom redundant controller that failed. On the log only "Alternate RAID controller module removed" and "Temperature sensor removed". We tried to remove and put it back again with no results. We opened it and no signs of failure on the PCB. We don'

Does Powervault MD3620 support having drives of the same type but different DP/N Number inside the same raid setup? I consider buying used MD3620 and add DELL SXKLTK SSD 400GB drives and install in the same raid, and they come with different DP/N Number: example: T2TPF and C06VX

Hi All, I have a little problem with our powervault. A few weeks ago, we replaced the controller of one of our powervaults. It synced up perfectly with the configuration of the working controller and no issues were found after that. Unfortunately, 1/2 weeks ago, the problem began to start. around th

Hi, I have some question about Windows Storage Server 2016 Standard Edition, We are using Dell NX440 Windows Storage Server 2016. My question : This Windows Storage Server 2016 standard edition can support below services -Web server IIS Services? (if supported may i know which version it support

Hello Everybody Kindly I need your assistance. I have PowerVault MD3800f and after inserting new disk I got into lockdown. When I connect serial cable and press S I get the following options: 1) Display IP Configuration 2) Display Seven Segment Code  Q) Quit Menu When I use "Display

Greetings everyone! I need a help to define what may be wrong with the expansion module connection. I have 2 devices - PowerVault MD3200i (f/w ver. 08.20.24.60, single module) and recently purchased used Compellent SC220 (f/w unknown, dual module). Module #1 of SC220 is connected to SAS OUT port o

Hi, i need to replace a broken SCSI to SAS Adapter with a used one and the default password was changed. Can you help me with with key for challenge : CDVJ5MG712S Thank you very much.

I'm planning to order a server and a tape library from Dell. How ever, in R640 technical guide I found: "The R640 does not support internal tape drives, however, external tape backup devices are supported.Supported external tape drives:• External RD1000 USB• External LTO-5, LTO-6, LTO-7, and 6 Gb S