Search Results (910)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
Hi, What is recommended % for Local Replication Reserve with Keep Failback Snapshot? Our space is running low and current local replication reserve is set for 100%. The volume changes rate between replication is less than 5%. Can we lower local replication reserve to 50% to free up the space? Than
Question
•
EqualLogic
Community Accepted Solution
Hi, We have a 3TB volume with 2.31TB in use. The snapshot reserve was set to 90% with 7 snapshots. We have reduced the snapshot reserve to 80%. The number of snapshots did not reduce, it has actually increased to 10 snapshots using over 2TB. Is there a way to reduce the number of snapshots? Kind R
Question
•
EqualLogic
Community Accepted Solution
storage array still in initializing state for a day quick response advantages
Question
•
EqualLogic
Community Accepted Solution
I am in the process of upgrading firmware on my 4100 and 6100 units and the support matrix will require me to upgrade VSM from 4.0 to 4.6. I currently have the appliance and I do not know if there is an upgrade path or if its a redeployment of the OVA for the appliance. The manual did not show anyth
Question
•
EqualLogic
Community Accepted Solution
Hi. I have a EQL group (3 members) hosting LUNs that are used in Hyper-V clusters as CSVs. One of these LUNs reports (SANHQ) higher than expected avg, disk queue length - the numbers vary from about 6 to 9 steady. However on the Hyper-V hosts that have this LUN connected the current/avg. disk queue
Question
•
EqualLogic
Community Accepted Solution
There is a broken link to the above on the PS Series firmware page. Could anyone help me out with the release notes? Thank you in advance, Erik
Question
•
EqualLogic
Community Accepted Solution
I know this isn't a critical fault but in the past I've used vmkfstools -y to resolve this. We are running ESXi 5.5 and the EqualLogic firmware is V7.1.5. I know its old and we have it scheduled to upgrade soon. My question is why doesn't vmkfstools -y work any more in reclaiming disk space? If
Question
•
EqualLogic
Community Accepted Solution
We are using the OpenStack Mitaka Cinder driver for EqualLogic to provide our test system with a variety of storage volumes. The driver (according to logs) repeatedly issues calls to "pool select default show" that take (at best) around 20s each to complete - considerably longer on a busy system.
Question
•
EqualLogic
Community Accepted Solution
Hi, I'm having an issue to configure the SNMP Notification Settings onDell EqualLogic San Headquarters. Everytimes i click on the Settings > Snmp Notification Settings, it will prompt out the window about WCF Connection not available with message "WCF Connection is not available. Please verify
Question
•
EqualLogic
Community Accepted Solution
Hi everybody, I'm trying to rethin a volume on a Windows Server 2008R2 server on EqualLogic. On EqualLog is states 100% full, but on Windows it uses 70GB from the 600GB... When trying a rethin i get the message: eqlrethin l:\Rethinning 95% of the free space on volume l:\- Rethinningfailed to ret
Question
•
EqualLogic
Community Accepted Solution
Where can I download the latest Group Manager software for use on a PS6510E1 array? thanks, Robert Matthews
Question
•
EqualLogic
Community Accepted Solution
Where can I find Vasa Provider for equalogik PS series for VMware 6-6.5 (HIT Vmware). At http://eqlsupport.dell.com I see HIT/VMware Version 3.1.2 for vCenter 4.1 and 5.And VSM/VMware® Version 4.6.0 doesn't work with vCenter 6.5.
Question
•
EqualLogic
Community Accepted Solution
Dear All, I have facing undermentioned error on storage box. Critical hardware component failure, as shown next. C2F power module has insufficient hold time. any needful advice to resolve the said issue. Thanks and Best Regards, Erik Castro
Question
•
EqualLogic
Community Accepted Solution
Hello everyone. I'm new to the forum. We recently setup a RHEL 7.1 server and would like to setup multipath connections to our SAN. What are the pros/cons of using RHEL native multipath vs using the Dell HIT Kit for multipathing?
Question
•
EqualLogic
Community Accepted Solution
Hi, I have a group manager with 4 hours ahead and NTP not configured. If I configure the time manually and adjust the NTP server, my production environment is don't affected, right? Att, Daniel Carvalhal
Question
•
EqualLogic
Community Accepted Solution
I am continually getting a message saying "Group Manager requires Java SE 6 Update 31 or later" when I try to open up Group Manager. I am on Java 8 Update 131 so why do I keep getting this and how can I get past it?Thanks,Dave
Question
•
EqualLogic
Community Accepted Solution
Hello, I think our local reseller might be trying to pull a fast one on us, and I just want to verify something with the community before I open up a can of . We have an Equallogic PS4100XV, a few years old I agree, but it is working just fine, and we are quite happy with it. When we bought it we
Question
•
EqualLogic
Community Accepted Solution
I am going to buy EqualLogic PS6010S10GbE 16x800GB which would be used for a stroage in my RAC. Please anyone tell me the stroage is blend well with Dell PowerEdge R710 server or not(nodes in my RAC). Additional sily Question: is the price of the storage contain for 16*800GB SSD hard drives or sho
Question
•
EqualLogic
Community Accepted Solution
I'm trying to set up the VSM for the first time in our vsphere environment. We have an Equalogic 6510 we are testing this out on. I have the VM appliance installed, have it's management IP configured. I added another NIC for the storage network. However when I go to enable the storage network
Question
•
EqualLogic
Community Accepted Solution
Good afternoon All I have a 2 unit SAN (PS6210 x 2) and I now have a new 3rd PS6210 - part of my problem is that the Firmware versions are 2 versions different so I can add the new one into the existing pool. The 2 unit pool is almost full and it would mean quite a lot of disruption to upg
Question
•
EqualLogic