Search

Hello everyone, I contact you and hope to get some help after a crash. "uname -a" Command output   # uname -a NetBSD 5.0_STABLE NetBSD 5.0_STABLE (EQL.PSS) #0: Fri Jun 19 20:27:07 EDT 2015 build@m64:/buildarea/V7.1.7__Fri_Jun_19_2015_20_20_05_EDT/bin/destdir.sbmips.64.release/EQL.PSS.64 sbmips   "

Dear Community, I have a decommissioned SAN PS4100 which was disconnected from our existing cluster and at the time, it was physically powered off and disconnected and not removed properly from the cluster. I want to reutilize it. I powered it on and connected the MGMT cable to a different physica

Hi, im administrating a vmware infrastructure based on 2 Esxi and Equallogic. the VMs on both Esxi are very slow. when i checked the Equaloggic i found that the controller battery status is failed. also i noticed that iSCASI connections is 2. i want to know if any of this issues made the VMs slow

Hi Everyone, Can anyone tell me what the difference is between the channel boards/cards with partnumber 0944611-01 and 0944611-02? I was told that 0944611-01 comes with the PS6500 and 0944611-02 with the PS6510. Is this correct, or did I receive wrong information? Grtz,Marcel

If I have EQ "volume-1" and I clone it to "volume-1-clone", can I have both attached to the same Windows server (2012r2) without any kind of conflict? In Windows, they are GPT/NTFS.  Being a clone, I wasn't sure if there would be any identifiers on the disk or NTFS volumes that would end up no

We have a M1000e Chassis with 2 Equallogic PS-M4110X, but we had a failure with one of this units, and the availability of the volumes was compromised. It was configured with 2 pool members with RAID6 Policy, but after changing the operation to the DR Site, we are considering the reconfiguration of

When attempting to admin the SAN via group manager I get the error "Max number of GUI session is limited to 7", so I am unable to login. I access the CLI and run the command "show usersessions" sure enough I see 7 connections, interteresting part is they are all from me, while working in the SAN I

Enclosure Management service are not available error on PS 6100 SAN (EMM Link Failure) after installing new 07-0400 Array controller module.

Hi All At the moment I have 3 x PS6200 XV SAS units and they are working well, I have some older none supported PS5000xv units - my question is can I take the drives out of the and put them in a supportable SAN unit - if so which one - or is it just not worth the hassle? It seems a shame to waste

Does this event ID imply that the Equallogic interface was Administratively disabled. I see this in the logs that both the interfaces on a particular member are showing entries for iscsi connections being closed and the reason for closing the connection is being mentioned as Administrator set netwo

I'm trying to disable the legacy protocols for our Equallogic SAN. In an putty session, I log and type the following: grpparams crypto-legacy-protocols disable Result: Error: Bad command. I must have the entry wrong. I found this link which references a CLI reference guide, but can't find it any

Hi,After I ran through the initial setup via CLI, I typed this command in order to remove the 2x HDD spare from the raid10 that I created member select membername raid-policy raid10-nospares This worked well the first time and but now added 4x more HDD and 2x HDD has been added to the raid10 pool an

Dear Sr. I have a Dell Equallogic ps 6210 SAN storage and the priviuse system administrator left the company without giving any administrator password, is there a way that we can reset the admin password without affecting the data & the current configuration so that I can access the

So now that ESXi 7.0 has been released I’d like to give it a spin, I remember a document floating around that had recommended ESXi configuration when not using the EQL driver. Can I get a link to that and is there any updated info for ESXi 7.0 backed by EQL or does the same info still stand? Thanks

Hi Hi All Does anyone have an archived copy of the 32bit disk firmware and what was the last compatible unit firmware? I have version 7.1.8 is there a later version?   Thanks   Eric

Hello, I have a client that erroneously still has the Equalogic (PS610E GROUP FIRMWARE V 7.0.9 (R400081) without guarantee and the alarm that I had from Warning happened to Critical with the matter that I put. What I want to know is the real time that it can carry that directly does not turn on whic

Hi i have 4 array disk and 50 hyper-v mounted i need to power off my 4th equal logic array disk so i need to look for which hyper-v is connected on it without accessing on array disk interface !! Any solution ? Need some help please help

Is there an Equallogic tool or Powershell script to export 2008 iSCSI settings to a folder - so I can then import to a new upgraded Windows OS server? Thanks,  Milty 

Someone help me, I can't reset the equallogic PS4110. get that information

I'm trying to check the active CM on the equallogic ps4110, I ask for help