Search

equallogic PS6100. have two of them, one syncreps volumes to the other. i have this one thin provisioned volume that I store some linux servers on. this volume is growing by 3% every day for the last few days, up to to 77% in use space now. although I could just add more space to the volume ( I

so when I got to settings on my Volume I want to increase size to, and go to Modify Settings, and change space to add some storage, I get prompted to create a snapshot, and to make it read/write. since I have not added storage to volume before, I have to ask, is it standard procedure to go ahead an

In my old production environment, I have 2 PE R640 and a Dell PS4100 connected to a PowerConnect 6224 using the iSCSI protocol. Now, I bought two new Dell EMC S3124 and a Dell EMC SCv3020 to improve my production environment, and I'll continue using iSCSI protocol. My new switch configuration is i

Hello I have EqualLogic PS 6100 controller and did a reset using cli.  It wiped everything and started setup. However when I go through the setup name, IP, etc first it says looks like it was running before do you want to restart? I said yes and it is cycling with error can't bring eth0 on

Hello everyone. We received an Equallogoc ps6110 storage.I made the initial configuration, RAID policy, volumes, etc.The storage and server are connected to a DELL powerconnect 6224 via SFP+ (SFP+ module at the back of the switch).Both can communicate (via ping) and I can also access (the command-l

Heads up on KB4499177 We encountered an odd issue on some of our Win Server 2016 nodes, that connect to a PS4210 array, started this morning at about 3am. Trying to connect to some volumes (but not necessarily /all/) on the array was reporting a "Target error", and found elsewhere reports about it

I just installed a new VSM 5.0.0 appliance in my vSphere 6.5U2 environment.   I have an EqualLogic group with members on v10.0.1 of the EQL software, which I think should work.   I've triple-checked the IP addresses.  I can connect to the EQL group via the java client with the

Hello, Is it still possible to upgrade the firmware of an EqualLogic PS6000? We're currently running V7.1.2   Kind Regards,   Bjorn

I've got a PS6210 set up for a lab environment and while I can see the fan speeds I'm wondering if there is a way to reduce them to let it run a bit warmer but bring the noise level down. Anyone successfully done something like this?   Thanks.

Hello, I want to upgrade the firmware of the controllers on our equillogic PS6100. We're currently running V.7.1.2. Is it safe to upgrade this to a new firmware without the equillogic going down? Or do both controllers go down? Thanks in advance,   Bjorn

Hello Community   I recently deleted a 300 gb vol on our Dell Equalogic PS6100 but it is not showing as returned on the SAN storage pool. Any thoughts on this?

Re-purposing our PS6610, with 41 disks (4TB SAS 7200rpm). No new drives added and all was working just fine before I re-purposed the unit I've reset the device (twice), run the setup, updated the firmware on controllers (to v10.0.2) and the disks to v12. Everything is good to go except for the in

Hi to all I was aproached by some friends to help with setup of Hyper-V servers based on some refurbished HW. That company is in process of buying the following: RFB - HP server DL580 Gen7, CPU X 2,4 x 4, 512 GB DDR, 146 GB x 2, 1200W x 4 - 2 servers (also reseler is stating that this server have

Hi. I am trying to upgrade my second (of three) PS6500, but I am encountering errors. - when I tried to upload "kit_V9.1.8-R466123_363585727.tgz" through GUI, I got:  deleteUpdateKit request timed out - when I tried FTP, I got:  425 Can't build data connection: Operation timed out.

I have `Dell EqualLogic PS5000E iSCSI Array`. I have connected this `SAN` to servers directly. I used `Jumbo Frames`. In this case, everything is ok. My storage is `~25TB`. Now, i need to choose, which RAID level i have to use. SAN proposes only 3 levels: `6`, `50`, `10`. I have 16 hdd-s with `~1.8T

Hello, i started to install my Dell EqualLogic PS5000E from `0`. Everything is fine, but i made error. I have storage `~25 TB`, and i created `RAID 10`. It is not ok for our company, because we need more place. Ok, i decided to expand my raid from `RAID 10` to `RAID 50`. But it is taking a lot of ti

Hello, I have an equallogic PS6500E - have upgraded the controllers to latest version had a drive failure and swapped out the faulty drive for another ST33000650SS - 6H6FG the other drives in the system are at revision level RE12 - the new drive is RS14 - is the fact its RS not RE the issue here?

My company and I recently (2 days ago) setup two PS6000's. Through the Group Manager java applet, I altered the administration settings to only allow secure connections to be established, and this was going fine for about a day or so. As of today however, I'm unable to establish an encrypted connec

Hello, I want to enable the snapshot of a lun, but I have some doubts: Q1 - Where are shanpshot stored? In the same volume of the LUN? Or in another area? Q2 - The snapshot reserve (%) is the space provided for snapshot. Does this mean that if I want a 1TB LUN, do I need to create a larger LUN to

Does the Dell Equalogic PS4110 support 4kn drives?