Search Results (910)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
Good Afternoon Ladies and Gents, I am currently planning an upgrade for Dell VSM, The current version is 3.5.3.10 and we are looking to go to version 4.7.0 for VMware 6.5 support. Im struggling to find an upgrade path anywhere, I am aware i could recreate the VM using the OVA but we are trying to sa
Question
•
EqualLogic
Community Accepted Solution
We use an EQL PS6100 array for our VDI environment. The issue is it is taking up a lot of space even after I deleted the VDI's. How do I reclaim this space in the group management?
Question
•
EqualLogic
Community Accepted Solution
Hi, we have a PS6100 which was populated with 12 X HDD. This was originally RAID10, and we converted to RAID6. We needed more capacity still and have installed more ST3000NM0023 drives (x6) of them, of which the capacity has dynamically increased. We then couldnt find any more of these model drives,
Question
•
EqualLogic
Community Accepted Solution
Hello, Is there a link for the latest firmware for the Equallogic PS4100X available? We got a new controller and now the firmware versions are mismatched. Active Controller is version V6.06 (R351932) Secondary Controller is version V8.1.1 (R417753). We can either move the active to
Question
•
EqualLogic
Community Accepted Solution
HiI have a Equallogic PS6000 running FW V5.2.6 with 4400 Lost Blocks after a power outage. Other places in this support forum I see a script that can be run on the device. Since the devices are are of support where can I obtain the script?Kind regards Christian
Question
•
EqualLogic
Community Accepted Solution
We have both Equallogic and Compellent storage in our env. and we use both SAN HQ and Storage Manager to manage the storage array. Can someone confirm Storage Manager can be used as replacement of SAN HQ? We I know I can add PS group in the storage manager but not sure if it will collect the same in
Question
•
EqualLogic
Community Accepted Solution
Has anyone had an issue on a PS6500 when a disk has a history of failures? The disk in question has been replace twice but the message does not disappear and cannot be used? Does anybody know of a way to clear this message. Thanks Chris
Question
•
EqualLogic
Community Accepted Solution
After upgrading EQL6100 firmware from version 7 to 8, SANHQ 3.0 no longer allow me to save SupportAssist configuration. I tried both local and domain admin accounts.
Question
•
EqualLogic
Community Accepted Solution
I have a PS6100 where the locking occurs where ISCSI drives mapped as local disks on a windows 2012 R2 Standard, every two weeks they lock, so I have to reset the controller and switch to another, to get back to work, this matches a firmware upgrade which was made for version V9.1.4 (R443182), this
Question
•
EqualLogic
Community Accepted Solution
Hello I trying to bring snapshot onlineto recover vhdk file but when i prees it I get an error " not connected server" Please i need help the server is down Thanks
Question
•
EqualLogic
Community Accepted Solution
Good afternoon, My environment has quite a number of different EqualLogic SANs in it that are all behind on their firmware, about 3 or 4 versions behind. We know they need to be updated as we are getting alerts letting us know that our Disk Drive Firmware also needs to be updated.
Question
•
EqualLogic
Community Accepted Solution
L.S., I've obtained a Dell Equallogic PS6000 chassis with 2x Control Module type 7. Firmware is version 7.1.7 (uname -a). After connecting with a serial console cable, and performing a reset to factory defaults, the unit is still in some sort of initialization state (message: "The storage array is
Question
•
EqualLogic
Community Accepted Solution
Hi, we have an old PS4100 (well two actually), configured in a Group. We needed to gain space to allow us to carry out a re-jig of the fabric. The conversion from RAID10 to RAID6 is 33% through, and at the start we also ticked the box to 'Immediately expand group capacity'. The issue we have is that
Question
•
EqualLogic
Community Accepted Solution
We have an EqualLogic group comprised of 6 members. There are 4 pools in the group. All of the disk arrays are running firmware version 8.1.11. We have moved all data off 2 members and I would like to remove both members from the group without impacting volumes on the other 4 members because they h
Question
•
EqualLogic
Community Accepted Solution
Hello! I have recently purchased a new Compellent Storage array that I am monitoring through Storage Manager 2016 R3. I am able to connect my old PS groups to Storage Manager, but cant seem to find any IO Usage or Charting data. Is this even possible or do I still have to use SANHQ for that? &n
Question
•
EqualLogic
Community Accepted Solution
Are these cables compatible/supported for 10GB iSCSI connectivity between the PS6210X and Dell N4032F switches?I've already purchased the array and two N4032F switches. I wanted the non-F model of the N4032 switches and was going to use 10GBASE-T all the way through but the fiber models got ordered
Question
•
EqualLogic
Community Accepted Solution
PS-M4110 has only two eth; eth0 and eth1. Once I enabled dedicated network management, eth1 marked as mgmt-only and the other one is for SAN as usual. eth0 is DCB enabled and assigned vLAN. the box has one group only with one member. I faced a difficulty when I want to change the SAN IP. there is n
Question
•
EqualLogic
Community Accepted Solution
Hi, Trying to change management IP Settings. 2 x EQL 6100XV Current settings on eth4 management ports Group Mgmt IP: 192.168.180.27 / 255.255.255.0 EQLSAN1 IP: 192.168.180.28 EQLSAN1 IP: 192.168.180.29 Change IPs to 192.168.192.197 - 199 / 255.255.252.0 I attempted to use GUI (Group Conf
Question
•
EqualLogic
Community Accepted Solution
Hi, I have recently moved my clustered VMs to some new nodes (from Dell R710s to R740s). The VMs run on a 3 node Hyper-V 2012 R2 cluster. The VM files are stored on Dell EqualLogic SANs. Some VMs are on CSVs while others are on dedicated LUNs/volumes. The ones with dedicated LUNs are the ones that
Question
•
EqualLogic
Community Accepted Solution
I have a PS6500 in its own RAID6 pool with around 50TB used. I need to repurpose this array for a different location, so I need to move all its data to a different pool. My initial plan was to merge our two RAID6 pools and then move the 6500 back out to its own pool again while leaving all the dat
Question
•
EqualLogic