Search Results (909)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
Hi Everyone, I re-initialized our VNXe1600 in order to clear the old configuration and set it up from scratch. It is at the firmware v.3.1.9.9570228. But after re-initiatialization started and the SP's rebooted, it does not get IP by any of available methods. The SPs are blinking blue and orange
Question
•
VNX
Community Accepted Solution
Hi, I forgot to upgrade my vnxe 3200 os before flash support ended. Now I'm trying to upgrade it through RPClassicUI. The software sucessfully reached the server, but when I click to the "Upload Candidate version" Only an empty windows showed whitout any Browse button or anything. Any suggestio
Question
•
VNX
Community Accepted Solution
Hi, after I successfully upgraded a VNXe3200 I noticed that the new HTML5-GUI does not offer the same amount of functions. Under "service" the tasks (reboot, enable SSH etc) are missing completely. Under access/Ethernet the NICs are presented as if they were -not- aggregated! The function/buttons f
Question
•
VNX
Community Accepted Solution
Evening all, I'm trying to find out about upgrade paths for this VNXe3200 I have. It's currently on 3.1.5.7213336 3.1.10.9946299 has been uploaded as a candidate version a while ago, but never applied. Can this jump from 3.1.5 to 3.1.10 be made? Does the system have verification built in to verif
Question
•
VNX
Community Accepted Solution
Hi everyone, yesterday I noticed that I can't access my CIFS shared folders. It's asking me for a user and password but whatever I type is incorrect but it shouldn't be. Connecting through computer management also says I don't have permission (I'm the domain admin). I have admin access to the EMC
Question
•
VNX
Community Accepted Solution
Trying to access service via mini DB-9 serial connection and or spa/b ethernet service ports on a VNXE3150. Can anyone verify the default service IP's on the SP's or the serial connection options 9600/1152/192?
Question
•
VNX
Community Accepted Solution
Hello Experts, We are migration from VNX to Unity using SAN Copy incremental push. SAN Copy part is pretty clear to us. However, we want to know on the Host side(Solaris Sparc 11 with various LDOMs) considerations. What needs to be done on the new disks on Solaris. Will it be just bringing the ap
Question
•
VNX
Community Accepted Solution
Hi all: Since 3 days ago our access to Unisphere console it doesnt work due certificate expired. For try to fix this issue we performance the following steps: 1* Change the time in out server between the certificate "Valid from:" and "Valid to:" time.2* Connect to Unisphere (sysadmin user) In th
Question
•
VNX
Community Accepted Solution
I have a VNX5800 with 8 physical interfaces allocated to a LACP Device. I need to remove 2 of the interfaces as they will no longer be used and the assigned IP's can be returned to be reallocated elsewhere. I was just wondering the correct way to do this because i don't want to affect the interface
Question
•
VNX
Community Accepted Solution
Hi, I'd like to add 10GbE to our VNX5400 (block) but not sure which module I need. Are the relevant part numbers listed anywhere? Cheers Paul
Question
•
VNX
Community Accepted Solution
how to recover or Unlock RPA CLUSTER Passwords in EMC VNX 5800 Hello team, Please i need help. I got the issue of login to Recover Point Appliance Cluster using all the credentials that have been setup. i wonder how can i reset, Unlock or recover those password so that i can be able to access the
Question
•
VNX
Community Accepted Solution
Hello.I got a VNX5600 block verison with 05.33.009.5.238. is there eny way to find a recovery image for this version? or can i use another recovery image for my system. Thanks.
Question
•
VNX
Community Accepted Solution
Hi, Does anyone know if the VNX5400 supports Windows 2019 for AD? We are looking to upgrade the domain controllers currently on Windows 2016 to Windows 2019. Just checking if the file shares is supported based on the SMB version, etc? Are there any compatibility issues with Windows 2019? If so, can
Question
•
VNX
Community Accepted Solution
I installed a custom cert that seemed to apply fine. I can access the Unisphere logon page and log in. From there I get the following error: Proxy Error The proxy server could not handle the request GET /index.html. Reason: Error during SSL Handshake with remote server I tried svc_initial_config
Question
•
VNX
Community Accepted Solution
Good Day for all! On this disk write : "Removing these drives willmake the array unusable". Hot spare in use now, and i have new same EMC hdd. Can i just replace fault disk to another one? It ok?
Question
•
VNX
Community Accepted Solution
I have a question about the naviseccli security file. Seeing if you can please point me in the right direction. Quick background, we are trying to setup an Avamar pre back script to take a snapshot of a lun on the VNX. We can currently run the script from command prompt and local user a
Question
•
VNX
Community Accepted Solution
Hi, I have a EMC VNXe3150 with version: "2.4.5.23339 (Mon Nov 18 11:54:17 GMT+0100 2019)" and I would you like upgrade at last firmware version, but I not find the official firwmare. Where is it? Thank you. Best Regards. Andrea
Question
•
VNX
Community Accepted Solution
Hi all, I am a storage admin on a multinational company, recently my company decides to migrate all the cifs shares with all security and share permissions from VNX5400 to Virtual Windows Server using LUN's from storage in order to decommission the filler and using Windows to run the file server ro
Question
•
VNX
Community Accepted Solution
We just purchased a new blade system (DELL FX2). Each blade is configured with two fiber HBAs that are connected to two new downstream fiber switches. Each downstream switch has an ISL connection to a switch connected to the VNX. Each blade's HBAs show up on the appropriate switch. Everything look
Question
•
VNX
Community Accepted Solution
Hello, On vnx5300, Flare on SPA is damaged. In this case, the SPB loads normally. How to restore Flare loading on SPA with SPB? There is one more similar array - fully working. Can he help in recovery?
Question
•
VNX