Search Results (822)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
All our servers are PowerEdge range servers in various locations and we would very much like to manage driver updates and reports using SCCM. There are plenty of information available on how to do this for desktops and laptops, but not enough information for servers. Is there a guide available som
Question
•
Systems Management General
Community Accepted Solution
Hi, I am trying to make some simple web application that get system status using redfish api through iDRAC port. I can test some redfish apis through iDRAC port(we assigned ip to iDRAC and can access through ip) using insomnia tool(rest api test tool). but when I call them in web application(react,
Question
•
Systems Management General
Community Accepted Solution
For system inventory, I currently use WSMAN to the idrac to retrieve DCIM view information. These DCIM class are examples: DCIM_MemoryView, DellDCIM_NICView, DellDCIM_PowerSupplyView, DellDCIM_PhysicalDiskView. I do not use WSMAN for much more than inventory of the DCIM view classes. According to
Question
•
Systems Management General
Community Accepted Solution
Hello, I have been given a Dell PowerEdge T410. I have been updating everything I could from it, but I got stuck in the Lyfecycle. It currently has version 1.5.1.57 and I would like to update it to the latest version, 1.7.5. I downloaded version 1.5.2.7 first to try to do it gradually, but it tells
Question
•
Systems Management General
Community Accepted Solution
Hello, I am looking at enabling the action to power off the server if the Critical temperature is breached on a few servers that are in a space with frequent cooling issues. Does anybody know which temperature threshold this action references (inlet temp,exhaust temp,cpu). Looking at System Settin
Question
•
Systems Management General
Community Accepted Solution
I am looking to upgrade some older servers. Those are ESXi hosts Dell PowerEdge R630's. We are currently on BIOS version: 2.1.7, Firmware version: 2.21.21.21, and Lifecycle Controller firmware: 2.21.21.21. What would be the path to get those current? Thanks.
Question
•
Systems Management General
Community Accepted Solution
I'm having trouble getting some Dell network switches to be detected properly in OME. Since they're network switches, monitoring is done with SNMP. I've created the Community String on the switch, and initial Discovery goes fine in OME. However, within a few hours usually, the swit
Question
•
Systems Management General
Community Accepted Solution
Due to the 'HTTP/HTTPS FQDN Connection Failures On iDRAC9 firmware version 5.10.00.00' issue, I'm looking to batch set DNS iDRAC Name and Static DNS Domain Name via remote racadm. As we're on 6.xx now, group and object names have changed from previous major versions. I have been looking thro
Question
•
Systems Management General
Community Accepted Solution
I saw the 3.10.0 release came out yesterday.https://www.dell.com/support/home/en-us/drivers/driversdetails?driverid=fmk91&dcp=emailWe have 2 instances running 3.9.0 and neither of them are seeing the updates (3.9.1, 3.9.2, 3.10.0) are available with the Online option as described hereI looked at
Question
•
Systems Management General
Community Accepted Solution
System Model: PowerEdge R720Operating System: Windows Server 2012 R2BIOS Version: 1.6.0iDRAC7 Firmware Version: 1.66.65 (Build 07)Lifecycle Controller Firmware: 1.1.5.165 Start of following events: 2023-01-22 17:34 Used Lifecycle to execute Dell Update Package BIOS_8P8WX_WN32_2.9.0.EXE and receive
Question
•
Systems Management General
Community Accepted Solution
Hi,I am trying to re-configure the IDRAC from racadm (can't reach from network). I am getting this: racadm getniccfg IPv4 settings: NIC Enabled = 1 IPv4 Enabled = 1 DHCP Enabled = 1 IP Address = 10.0.100.202 Subnet Mask = 255.255.255.0 Gateway
Question
•
Systems Management General
Community Accepted Solution
Hi, I have a couple of iDRAC7 that now fail to search for firmware upgrades from downloads.dell.com.When looking at Job Queue.The error message is RED060: The specified repository catalog is not supported. Has the Catalog.xml changed format?
Question
•
Systems Management General
Community Accepted Solution
OpenManage Enterprise says I need to upgrade my iSM LC DUP to version 5.0.1.0 for my PowerEdge R650, but the support website doesn't have any links to version 5.0.1, where can I download it? If I put in my service tag, the latest version available on the support website is version 4.3.0.0. The li
Question
•
Systems Management General
Community Accepted Solution
The PC does not Post and has error code 1,4 and amber light and pressing the power button shows code 3. It is a Core 4 with 4 GB RAM.
Question
•
Systems Management General
Community Accepted Solution
Hello, I have a Poweredge R730 and the CPU temp is always at 62-64 degrees Celsius, this is about 15 degrees hotter than the same server types in the same comms room and rack. Does this seem abnormally high? Interestingly the fans are running about 500 rpm lower than the other models. I have ch
Question
•
Systems Management General
Community Accepted Solution
Just installed OpenManage Administrator Node 10.3 and got the error "Windows can't verify the publisher of this driver software". Why does Dell have software with unsigned drivers!? This threatens the stability of my servers. Did Dell's OpenManage software get infected or is Dell just lazy??
Question
•
Systems Management General
Community Accepted Solution
Hi, I would like to check if Dell Poweredge Server are impacted by the above mentioned Intel security advisories https://www.intel.com/content/www/us/en/security-center/default.html Regards Soh
Question
•
Systems Management General
Community Accepted Solution
I don't see this for download under any service tag we have. Is there somewhere to download this publicly? Just trying to find a way to update a BIOS.
Question
•
Systems Management General
Community Accepted Solution
I have been using a small cli script assembled from the .jar files listed in the .jnlp file you get when you start the java console. It's pretty basic, I have one for idrac6 and one for idrac7/8/9. @echo offpushd %~dp0%set PATH=jre8-Windows\bin;%PATH%java ^ -cp avctKVM.jar ^ com.avocent.idrac.kvm
Question
•
Systems Management General
Community Accepted Solution
I have an Avigilon NVR that's running server 2012 r2. The server is out of warranty so I can't get any help from Dell. The server administrator will not accept credentials. No errors, just keeps prompting. I've read the articles about Java and it has no other version and the latest is installed. Tha
Question
•
Systems Management General