Search Results (197)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
I just installed Windows 2016 and tried to install open essential but I can't install open essential due to below error message. -One or more mandatory prerequisites for Essential are pending. Installation cannot continue. Run the Pre-Requisite Check for details. How do I resolve this problem to
Question
•
Dell OpenManage Essentials
Community Accepted Solution
Given SNMP services are running on all servers and Windows firewall is off. If I enter 10.0.1.0 / 255.255.255.0 as a Discovery Range, the service won't locate any servers running Server Administrator. If I then specify a server, for example 10.0.1.30 / 255.255.255.255 as a Discovery Range, the servi
Question
•
Dell OpenManage Essentials
Community Accepted Solution
I've got a blank...How do I delete a Discovery Range completely, so it won't come back?? (I don't want to Exclude it, just Delete it, because I want to recreate a similar range of IPs to discover.) Thx, John Bradshaw
Question
•
Dell OpenManage Essentials
Community Accepted Solution
Hello, I looked for how to return enclosure slot information (feature available in the GUI), but I can't find the request to do that. Could someone tell me if it's possible, and how can I do that please ? Thanks a lot in advance.
Question
•
Dell OpenManage Essentials
Community Accepted Solution
Hi, When I try to launch OME on our server, I get the error 'Parser error: could not load type 'System.Web.UI.HtmlControls.Htmlframe' from assembly 'System.Web, version=4.0.0.0, culture=neutral...' Some background - OME was working fine prior to a windows update that upgraded the .NET framework to
Question
•
Dell OpenManage Essentials
Community Accepted Solution
Hello, we use OpenManage Essentials v 2.1 to monitor our servers and switches. Now we a N1548 switch but in OME it is not getting classified as a switch. In the webinterface of the switch I configured SNMP which is correctly set in OME. Can you help me to classify thw switch in OME? Thank you.
Question
•
Dell OpenManage Essentials
Community Accepted Solution
Hi all, Really hope someone can assist with this. I've just done a fresh install of OME 2.2 including the hotfix on a fresh Win 2012 R2 Std VM without updates. When I perform the usual out-of-band and SNMP discoveries all my devices are listed with Device Names of "rfc.private.address.invalid.query
Question
•
Dell OpenManage Essentials
Community Accepted Solution
My customer try use dell OME_Server Config Mgmt_90 Day Trial license import on idrac8 R730 then he want to remote deploy os to R730 Server,but find some wrong.like as follow the 5th step should import a xx.csv doument, and I look for helpdoument,save word like the scend picture ,but I found
Question
•
Dell OpenManage Essentials
Community Accepted Solution
I'm in the process of setting up Dell License manager and have imported an inventory of servers which already have licensing installed on them (iDRAC + OME CfgMgr). However I find that whenever I try to Deploy one of the licenses back to the server (to test), I am advised that "No Matching licenses
Question
•
Dell OpenManage Essentials
Community Accepted Solution
I am trying to get OpenManage Essentials 2.2 to report health of ESXi.A server with ESXi 5.1 and OMSA 7.4 is showing healthServers with ESXi 6 and OMSA 8.3 only show a grey question mark. I cannot find any documentation stating which versions of ESXi and OMSA is compatible with OME 2.2.
Question
•
Dell OpenManage Essentials
Community Accepted Solution
Hi there, Is there a way to configure a login banner such that when a user runs Dell OME, there will be a warning banner that warns of unauthorized usage? Thanks. Mikhael
Question
•
Dell OpenManage Essentials
Community Accepted Solution
Our installaion is an upgrade from OME 2.1 (where we also had the issue)we use WSMAN to inventory our DRACs and they are marked as unclassifiedNote: on a OME 2.0 test server, using the same configuration, all is working as expected.The troubleshooting tool is working normal, when selecting WSMAN and
Question
•
Dell OpenManage Essentials
Community Accepted Solution
Will Dell OpenManage Systems Management Software (64-Bit) Version 8.3.0 work on a PE2900 server running Windows Server 2008 R2? Dell OpenManage Systems Management Software (64-Bit) Version 8.3.0
Question
•
Dell OpenManage Essentials
Community Accepted Solution
Is it possible to deploy an operating system(2012 R2) with features (example DHCP) with Dell Open Essentials? Thank for help. Farrell,
Question
•
Dell OpenManage Essentials
Community Accepted Solution
Hi, pardon the newbie question. I'd like to get started using OME and to use the 'agentless' one-to-many idea for some Dell 12th gen host servers running hyper-v/2012 and vm's. However, reading the docs I could find where it can be installed on win 10 or 8.1, i.e., w
Question
•
Dell OpenManage Essentials
Community Accepted Solution
Hi all, Can anyone tell me if the insecure protocols such as HTTP and TELNET are required for OME? Or are they just listed for legacy support? I'd prefer to only use HTTPS and SSH for my deployment if possible. Any help would be much appreciated! Cheers, Ben Loveday
Question
•
Dell OpenManage Essentials
Community Accepted Solution
OME is not getting Inventory and Status details for some servers. For example when looking at one of our PowerEdge R620s this is all that shows up: iDRAC firmware and LCC is up-to-date (version 2.21.21.21 is installed.) I have reset the iDRAC, and that has not helped. I
Question
•
Dell OpenManage Essentials
Community Accepted Solution
Hello, we are running a Powershell workflow to automate the configuration of the iDRAC of our PowerEdge servers, as part of this workflow I want to add the DNS name of the Server to a OME Discovery Range. Is there a OME Powershell module we can use to do this? Or as an alternative can we use an R
Question
•
Dell OpenManage Essentials
Community Accepted Solution
Hi all, I'm a newbie to OME and I've just tried updating some R730XD's to the new BIOS v2.0.2 and iDRAC 2.3 but when OME (or repository manager) connects to the online catalog it doesn't show these new versions as available. If I look at the FTP location manually it shows the current modified date
Question
•
Dell OpenManage Essentials
Community Accepted Solution
Hi, Can someone pls tell me the racadm command to turn off the checkbox in the following? I have tried racadm config -g cfgipmilan -o cfgipmilanalertenable 0 but it won't work. Thx, John Bradshaw
Question
•
Dell OpenManage Essentials