Search Results (2.9K)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
Closed
Racadm is slow and I want to use it in a script to check and fix the list if idrac users. I can run racadm get racadm -r server -u root -p pass get iDRAC.Users.1 racadm get racadm -r server -u root -p pass get iDRAC.Users.2 racadm get racadm -r server -u root -p pass get iDRAC.Users.3 racadm ge
Question
•
PowerEdge Hardware General
Community Accepted Solution
Closed
PowerEdge Server R620 Rack Server Recently we are facing a strange issue on our R620 server. Normally powering on the server, it picks up machine sound and noise until in start up mode and then slows down and operate normally like it should. However since yesterday, we see that when the server is
Question
•
PowerEdge Hardware General
Community Accepted Solution
Closed
Hello, I just installed a fresh out of the box R650x. At startup I have this error message. hwc8010 Config Error: SL Cable NO_SL_SRC and CTRL_DST_PA1 I can't find anywhere what cable is missing. Thank's for your help.
Question
•
PowerEdge Hardware General
Community Accepted Solution
Closed
I don't understand why from one dell page it says this is incompatible, but then another lists it as an option for download? This one gives it as an option: https://www.dell.com/support/home/en-us/product-support/product/poweredge-r730/drivers This one does not: https://www.dell.com/s
Question
•
PowerEdge Hardware General
Community Accepted Solution
Purchased an R740 off eBay, and Dell would not allow us to enter the Service Tag to download drivers. (It asks for login and then tells that "you are not authorized to view this product". So, I tried to transfer ownership at https://www.dell.com/support/assets-transfer/en-ca . But, once I enter the
Question
•
PowerEdge Hardware General
Community Accepted Solution
I have a Dell R320 that has been running well for about 2 years. All of a sudden I find that the screen was frozen and that the mouse and keyboard do not function. After rebooting the hardware it told me that there were no disks installed. I reconfigured the machine and it sees the disk as it did be
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hi, I am having a problem on installing the A100 GPU(80GB) into the server, it is installed through the PCIe slot, it fits perfectly. But when I'm booting the system, it shows me the power issue. 1) R7525 with A100 40GB, (Run without a problem) 2) R7525 with A100 80GB, which is
Question
•
PowerEdge Hardware General
Community Accepted Solution
Bought a R730xd with dual E5-v3 cpus (E5-2630v3). Everything worked without problems Upgraded to dual E5-v4 cpus (E5-2697v4) without changing anything else. Bios, and all firmware is up to date using idrac to update. Bios version 2.16.0 Now only ram in slots to the left of the CPU show up at all.
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hello We have PowerEdge R530 which I have been trying to install Windows Hyper-V Server 2019. I have updated the Bios to 2.16, iDRAC to 2.83.83.83. I have tried both Boot manager and Lifecycle Controller. Both method is able to boot to USB Drive and shows Windows Logo, then a dark blue background s
Question
•
PowerEdge Hardware General
Community Accepted Solution
I have a T340 with 64gb 2666 UDIMM (4x16GB) with E-2174G and system shows "Memory Error; an error was detected during memory initialization. Verify DIMMs are properly seated and that they are installed in correct slots." I was able to get the unit to POST and updated firmware/BIOS by swapping the p
Question
•
PowerEdge Hardware General
Community Accepted Solution
I am having issues updating the idrac on my r410 server. I do not believe the servers idrac has been updated since it was made. I have tried accessing the idracs website it hosts, but the ssl certificate and the TLS version are waaay to old for modern browsers. I have used edge in IE mode, but the
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hello all,I've got a strange behaviour on two of my XR11.They have a BCM57504 4*SFP+/SFP28 mezzanine card. I've got 4 SFP+ 10G-LR duplex fibre plugged in on the two servers, going to a Cisco Nexus 3064 Switch.When you plug or unplug the fibre on one of the SFP, all the other interfaces on the Broadc
Question
•
PowerEdge Hardware General
Community Accepted Solution
is Quadro RTX 5000 compatible on Dell Poweredge R730XD? I am planning to have a vm use it.
Question
•
PowerEdge Hardware General
Community Accepted Solution
Have a Dell PowerEdge r730xd upgraded from dual E5-2630v3 to dual E5-2697v4. Just changed cpus, nothing else. was working before. Cant get it to boot past "Initializing Intel QuickPath Interconnect" idrac works fine and I believe everything should be updated to support E5-v4 family have the dual
Question
•
PowerEdge Hardware General
Community Accepted Solution
In testing the iDRAC Email Alerts, we noted when the NIC is disconnected, we receive the appropriate alert; however, when reconnected, the email alert sent has the exact same message stating "down". Reviewing the Lifecycle Log, we can see the correct status being logged. Has anyone else seen this?
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hello, We have a single-socket T440 and we're already using the two x8 slots. We need to free up one of these slots for an additional card. Can we successfully move the Dell 12GB SAS card from an x8 slot to the open x4 slot? It is supporting an external LTO-7 tape drive. Thanks
Question
•
PowerEdge Hardware General
Community Accepted Solution
We have a lot of 11th and 12th gen dell servers, r610, c2100, r320, etc All of their fans idle down to be as quiet as a normal desktop pc. Our rack is in the same room as office space. Just bought a r730XD for some more demanding VMs The fans on this r730xd are many times louder than the whole ra
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hello, i would like to know if i can get a list of CPU's that work with Dell PowerEdge R420 & R520 Servers and if the CPU's Intel XEON E7-4830V2 - SR1GU or Intel XEON E7-4830V3 - SR222 would work on them ? Thank you in advanced to everyone how replies
Question
•
PowerEdge Hardware General
Community Accepted Solution
G'Day all, We have two del Servers Dell R540 and T440. On both we installed New Dell x710 Network Cards. Both Network Cards working fine on T440, but on R540 no Card is detected in iDRAC9 under System -> section PCIe-card. in PCIe Slot 4 is EMPTY (Slot4 is needed its 16lane i need for the fibr
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hello, I am seeking clarification on iDRAC and OS pass-through, with respect to the settings in using LOM, USB etc - in all of these option does the iDRAC need to be physically plugged in to the network to use it? ie: can the passthrough take the signals from the iDRAC and bring them into the OS wo
Question
•
PowerEdge Hardware General