Search Results (2.9K)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
Hi there, I have a brand new T150 Poweredge Server. I've installed Server 2022 standard. Each time I try to install Matrox video driver (and I've tried a couple different versions), I hit a bsod and it reboots. Documentation says this server should work with "Windows Servers and Hyper-V" Is there
Question
•
PowerEdge Hardware General
Community Accepted Solution
I repeatedly getting these critical system errors after a gpu kit installation. Fans are spinning and working but this errors is quite annoying. Is it normal or I'm using some kind of wrong model fans? Thanks a lot for your help and time.
Question
•
PowerEdge Hardware General
Community Accepted Solution
What is the part number for the CRTL_SRC_SB1 Cable for a Dell R550 16x2.5 SFF?
Question
•
PowerEdge Hardware General
Community Accepted Solution
Congratulations. There is a need to upgrade a 2U Dell PowerEdge R540 serverA second processor must be installed. Please help in finding the appropriate spare parts, namely: radiatorbracket to the processorfan Also, please tell me the SKU of spare parts. Currently, we have the following from open s
Question
•
PowerEdge Hardware General
Community Accepted Solution
Dear Team, We have an R750 server with riser config: Config2-1. with 4x FH and 2x LP We also have a converged GPU + DPU - A30X. It consists of combined Bluefield 2 and A30 GPU with claimed 230W power requirement: https://www.nvidia.com/content/dam/en-zz/Solutions/gtcf21/converged-accelerator/pdf/da
Question
•
PowerEdge Hardware General
Community Accepted Solution
I have minimised the system and the ds3 and ds4 lights on the motherboard are always on. idrac light is flashing orange. I've tried replacing the memory in 1R and 2R to no avail. any help?
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hi everyone! Can anybody explain what mean this message?
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hello, Trying to enable SR-IOV on a bunch of R350, CPU Intel Xeon E-2388G, BIOS 1.7.3, iDRAC 7.00.30.00, and the option is just not present, is this a bug or SR-IOV is just not present on R350 ? (can't find any documentation either) EDIT: also tried BIOS 1.0.1 and 1.8.1, option not present either
Question
•
PowerEdge Hardware General
Community Accepted Solution
I just setup two Dell T150 servers, identical configs, even the service tags are just one digit off. When I was installing the first one, I noticed the lifecycle controller interface was very sluggish. I did initiate a firmware update from it, and that took about 60-90 minutes to complete. T
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hello, I recently updated my BIOS on my R540 and at the end of the update it froze at a screen that says: Job completed. Continue to SSM task. Lifecycle Controller: Applying Updates or Setting System Configuration I went from BIOS 2.8.1 to 2.19.1 via iDrac System Update HTTPS My iDrac version is 5
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hello, Can you please tell me what BOSS S1 Card(s) are compatible with the R6515 10 Bay server? Is the 3JT49 03JT49 part number fine? Thank you
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hi all, I have problem with PEFX2S Base and all four PEFC640 BASE. A firmware or software incompatibility is detected between iDRAC in slot 1..4 and CMC ??? they all updated to the latest version, but I still have this problem, and I can't find and download the CMC,PLEASE HELP ME . THANK YOU . .
Question
•
PowerEdge Hardware General
Community Accepted Solution
Would the updated Dell T430 motherboard fit into the T420 case, offering USB 3, Pci 3, faster ram , faster cpu, etc etc ?
Question
•
PowerEdge Hardware General
Community Accepted Solution
I recently upgraded cpus from Xeon Silver 4215R's to the Xeon Gold 6248R's. Everything works great, all the temps are low, and no errors. But ever since this upgrade the fans have been sitting at 100% PWM constantly.
Question
•
PowerEdge Hardware General
Community Accepted Solution
Dear DELL team, According this documentation https://www.dell.com/support/manuals/en-us/idrac9-lifecycle-controller-v5.x-series/idrac9_security_configuration_guide/disabling-access-to-modify-idrac-configuration-settings-on-host-system?guid=guid-e80f9281-11d9-47a8-96cc-875c540901b0&lang=en-us ,
Question
•
PowerEdge Hardware General
Community Accepted Solution
I see in the technical guide (page 10) that the R440 can take up to 512GB of RAM when using RDIMMs: I was about to buy some RAM modules of 64GB each, but then I saw in the technical guide (page 24) that the 64GB module is not even listed as an option for RDIMMs. So, naturally, I would think that
Question
•
PowerEdge Hardware General
Community Accepted Solution
good morning, nice community! the context: there is a Dell T640 in the 8x3.5" chassis. I have purchased a single 2.5" SSD, a 3.5" caddy and a 2.5-to-3.5 adapter. the problem: I managed ( ! ) to put the assembled caddy inside a slot, but cannot take it out. Also, it looks like the caddy isn't long
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hi, I have an R610 with IDRAC 6, the problem is I can't monitor the physical disk. some say it can be seen from OMSA. Then the Proxmox OS is installed on the server. Can I install OMSA in a VM? and can Idrac still be accessed after installing Omsa? Thanks.
Question
•
PowerEdge Hardware General
Community Accepted Solution
There is a port on the motherboard next to SAT ports for the optical drive. It is Labeled SATA A, and has a "different" port than usual for sata drives. I assume there must be a special cable for this... if so does anyone know what that cable might be, and is that a bootable port when connected to a
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hi Do we support Nvidia A100 (80GB) x 3 Expandable upto 4 in R750 . I am not able to find in OSC for R750
Question
•
PowerEdge Hardware General