Search

I have to upgrade a customer's Dell Power Edge T20: Do you have experiences / recommendations for a 1 TB NVMe? The server description states: T20 has two network ports: I find only one: Do I have to enable the second one in BIOS (the server currently is not at my place)? Do you hav

Hello All,First time poster here,I purchased a R720 on ebay with the following specs :   Dell R720 - 16 SFF - 2x E5-2690, 8 Core - 192GB - H710 - 2x 1100W - 8x 1TB HDDAll was working as it should,  i then purchased another 192GB of ram and am now having issues.The original memory that cam

Hello, I have R820 (4 CPU's) with 32 32GB LR sticks (total 1024 GB). I am planning upgrade the server with 16 more 64GB sticks to achieve total server memory to 2048 GB. is it possible to achieve this configuration? if possible, can you please suggest where should I populate the new 64 GB sticks.

Hi guys, I have T410 with iDRAC6 with firmware 1.90 (Build 09). The server has ESXi 5.5. The current firmware doesn't support TLS 1.2 and I'm trying to upgrade it to a version with TLS 1.2. When searching versions on Dell I see: - Versions for different OS. Which one do I need? I thought iDRAC f

Good afternoon All Please can someone point me in the right direction, I have 4 M620 blades in a M1000e enclosure - I need to remove the OS and set back to factory defaults. I have googled but all I am finding is how to reset the idrac - I will also need to do that after I have a blank blade. &nb

Hello Dell Support, have seen on the support forum that the Dell Team can assist in recovering lost iDRAC licences. I am not sure as to how it happened, either through an update or other but the iDRAC licence is now gone from my R520 (could be due to a system board change even as the original system

Hi , I have a 1100w EPP power. The PSU fan will keep running from time to time (like every 30 secs) when the server powers off. Is it normal? I have another 750w PSU which keep quiet after the server is off.  Thanks!

What is the minimum-to-POST hardware configuration for the Poweredge T630?

I search for a NIC like Dell Intel X550-T2 (https://www.dell.com/de-de/shop/dell-intel-x550-t2-dual-port-10-gigabit-netzwerkkarte-kupfer/apd/540-bceh/netzwerklösungen#compatibility_section) for PowerEdge R740 or works this NIC also?   Thank You!

Hi, Since nothing is working on my T620 and its completely dead, I thought about checking if maybe the Front Panel is broken, and reseating the cables might do something. However, I cannot get the Panel out? I watched a video on how to do it, which is just loosening one screw, but that did not work

HI Support, if anyone helps to resolve this issue that occurs on my server r730 every month, I restart the server, and it's working OK, but after a month, the below error occurred again and the server went down. "A fatal error was detected on a component at bus 0 device 2 function 0" message

Dell PowerEdge R730. System has two Intel(R) Xeon(R) CPU E5-2687W v4 @ 3.00GHz processors and the following memory. A1 16.00 GBA2 32.00 GBA3 32.00 GBA4 32.00 GBA5 16.00 GBA6 16.00 GBA7 16.00 GBA8 16.00 GBA9 16.00 GBA10 16.00 GBA11 16.00 GBA12 16.00 GBB1 32.00 GBB2 32.00 GBB3 32.00 GBB4 32.00 GBB5 1

Hi, I think the BIOS settings will default after a CMOS battery replacement. But please, can someone confirm this? I have PowerEdge R430. Also, is any way to backup BIOS settings over iDRAC 8? TY TY TY.

Greetings! I am adding 16TB x 1 SATA HDD hot-plug hard disk to add more storage in our Dell PowerEdge T440 Server, that currently has RAID-1 (446GB x 2 SATA SSD) and RAID-5 (3725GB x 4 SATA HDD). The added new HDD is in the current state Ready (not Online).   Question:  What is the

Hi, I haven't used my PowerEdge T620 in a year or so. When I just turned it ON, it says: Configuring Memory.... and that's it. Nothing happens. It has been doing this for 30 minutes now. I remember having done something like this over a year ago and it did the same thing. I believe I waited for h

Our security tool alerted about week KEX algorithims enabled on the FN410S I/O module one of our non-prod servers has.I've been trying to figure out how to disable it but can't seem to run the command. I entered conf mode, but my only options under ip ssh server are enable and version. show ip ssh s

Looking for the Part Number for a TPM 2.0 Module for a R730. Also do All R730 have a TPM slot even if they didn't order one from the factory?

Hi all, Is the Dell Marvell FastLinQ 41132 Dual Port 10GbE OCP 3.0 SFP+ or RJ45? I'm seeing conflicting statements from sites I usually can rely on. : ( Thank you! -S

Dear Experts, We plan to buy 3 sets of R750 with "Dual, Hot-Plug, Power Supply (PS) Fault Tolerant Redundant (1+1), 1400W, Mixed Mode". I wonder what is the power consumption of that one.  If 1 PS runs and 1 PS is in sleep mode, I think it is around 1.4 kW per set, is that right? We need

Hi there, Which are the other vendors' SAN switches compatible with this card? Is there any list?  (in particular with HPE switches)   Thanks! Andrea