Search

Hello, I am trying to check the PSU compatiblity list for PowerEdge R720.   I search the Dell website but I couldn´t find it, do you have any link to check it? List?

Hello, I recently replaced a failing RAID 5 HDD(HGST) in a server from a supplier who gave me a Seagate ST10000NM018B HDD which is equivalent in specifications. The drive came online and the RAID rebuilt without a problem, but in the OSMA software it shows a warning because some of the information

Hi everyone I'm configuring a PowerEdge R650 for selling and when I'm choosing the Additional Network Cards theres the "Broadcom 5719 Quad Port 1GbE BASE-T Adapter, PCIe Full Height, V2, FIRMWARE RESTRICTIONS APPLY". My question here is, what are those "Firmware Restrictions" on these Network card?

Hi all,I bought a PowerEdge T150 server, I'm new to Dell. I also took an extra 7.2K disk to be able to create a raid 1, at least I have a mirror. Can you tell me what are the steps to follow, after mounting the disk in the tower, to configure the raid? Thank you very muchA.

Hey I was given a PowerEdge T630 server. I want to use it as a 2nd Windows 10 system to run my OBS streaming. I know overkill, but its what I was given. I have zero understanding of how a server should behave. I cant get a video signal out of it. I only have dealt with personal desktops which I'm

Hi, we have a Dell Poweredge T430 with 2x Intel(R) Xeon(R) CPU E5-2630 v4 and would like to replace them to run virtual clients with Windows 11.What type of CPU would go that support Windows 11 and what is the part number?Best regards

Hi there,I've got a PowerEdge R320, great deal, £70 for an E5-2450, 48gb ram, dedicated enterprise iDRAC, both 350w PSU's and 3TB HDDs with a raid controller. However, I'm having lots of trouble when I'm running into updating the iDRAC firmware. I'm a bit of a neat freak so I'd really love everythin

Long story short I’ve got 2 servers one being a power edge r610 with 6 cores and the second server is a power edge r710 with 4 cores if I want to take the CPUs out of my power edge r610 will they be compatible and work in the power edge r710 specs currently R610 cpu: Intel(R) Xeon(R) CPU E5

I am going in circles on this one. This is an older PowerEdge T320 with a PERC H310 control and iDRAC v7 controller. It has been in production and now we've taken it offline. We were going to set it up to do some testing but after deleting the RAID configs on both drives, we can't seem to figure out

Hello, I am trying to reset an iDRAC 6 user password that was configured by a previous sysadmin and forgotten.I have been trying to change it via System Settings. It appears to take the new password, but when I reboot and attempt to log in it doesn't work. Any idea as to this cause of this issue?

Solved: VRTX CMC update - Dell Community See previous thread.  As instructed, I attempted to update the standby cmc first.   According to the update page, it never updated.  But now I'm getting email after email from the CMC with warnings.  Clusters 2 and 3 keep droppin

Hi, I was given a server from my father but I didn't get credentials. He doesn't know them and they aren't the default Root/Calvin credentials. The issue is that it has no OS and I don't have a VGA monitor or cable. I tried 16 seconds on the "i" but it didn't work. Could someone please tell me if t

Hello, We bought a Dell PowerEdge R630 with a dual E5 Xeon CPU inside. When we boot up the system for the first time we encoutered the error "HWC2005 The system board Riser cable or interconnect is not connected, or is improperly connected." After searching for hours on the internet and Del

We have Dell PowerEdge R640 machine and on top of it the VMware ESXi V7.0 is installed. I need to upgrade firmware of Network Card Adapter to "firmware version : 22.31.13.70" but I am not able to find the Firmware which I can update. Please advise.  current driver and firmware versiondrive

Hi, I would like to add either PERC H330 or PERC H730P to a C6420 node. What is the list of part numbers I need to achieve this? My research so far leads me to the the following components: PERC Card PERC Riser/Bracket PERC Rise Bridge PERC Cable If the above is correct please confir

I am going to remove the mid plane on my R730XD as I don't need the drive bays and switch back to the base configuration/standard heatsinks in hopes of dropping CPU temps to make the fan noise more reasonable. My question is that there appears to be an option for some beefier 165w rated heatsinks (

Happy Friday, Can someone please help me get a part number for the XE7100 server's cable management arm? I need to buy several, but I'm stumped. Thank you! : )

ihave bought this device and need connect between them with fiber channel but ineed non expensive solution as fiber card is very expensive

Hi Dell, Our customer have changed the hard disk and the hard disk is working fine but the idrac show fail. Let us know is there anything can be done ? iDRAC & LC firmware is  3.34.34.34 Thank you