Search Results (2.9K)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
Closed
v2.20 Only recently getting cmc redundancy loss alerts. Lately also getting: SWC8619 CMC unable to process data for the server in slot 1. CMC8527 Unable to retrieve the server 1 memory information CMC8607 Unable to retrieve information about the firmware on server in slot1...... Need to update
Question
•
PowerEdge Hardware General
Community Accepted Solution
Closed
What size are the silver and black chassis screws on the outside of the 540? I'm missing a few on a new to me build. Thanks.
Question
•
PowerEdge Hardware General
Community Accepted Solution
Closed
Spontaneous power loss condition in my server, and it made the server unable to boot, or boot was not found, after that I changed the boot mode to bios, previously uefi, and after looking at idrac, in the storage section I found the error "RAC0501: There are no physical disks to be displayed. 1. Che
Question
•
PowerEdge Hardware General
Community Accepted Solution
Closed
Hello, Dell server power off in PowerEdge R440 and server is don't remote access. PowerEdge R440 server must normal by power off/on. Please help us. Thank you. Buyandelger
Question
•
PowerEdge Hardware General
Community Accepted Solution
Closed
Are the Dell PowerEdge 16th generation SSD trays the same as the 14th & 15th generations? The part number we have for the 14/15th generation caddy/slide is DXD9H. It doesn't seem to be the same but there is little to no information on it from what I have seen. Any help would be much appreciat
Question
•
PowerEdge Hardware General
Community Accepted Solution
Closed
Hey guys, I need your help.I have a powerge r610 and an established connection via IDRAC 6 Express,tell me how to get there or what needs to be downloaded to connect via the java application (as in the screenshot above) to be able to visualize the system image and install.Thank you for your answer!)
Question
•
PowerEdge Hardware General
Community Accepted Solution
Closed
Will the E5-2696v4 work on the R730xd? Obviously with all the bios and firmware to support E5-v4 family Asking because it looks like the 2696 is an OEM cpu or something non standard i guess Thanks
Question
•
PowerEdge Hardware General
Community Accepted Solution
Closed
I know it's antient, but I'm trying to determine if any of the following RAM modules/kits are compatible with my PE T110 II server: Crucial CT102472BA160B Crucial CT102472BD160B Crucial CT2KIT102472BD160B Kingston KVR16E11/8 Kingston KVR16E11K4/32 Samsung M391B1G73QH0-YK0 None of th
Question
•
PowerEdge Hardware General
Community Accepted Solution
Closed
Hello, we have a Dell PowerEdge R320 Server with a PERC H710 Mini Controller which reports a soon to fail RAID10 Member (0:1:0). We have 4x 300GB 2,5" SAS Drives connected to 0:1:0, 0:1:1, 0:1:2 and 0:1:3 at the backpane. The operating system is a Windows Server 2012 R2 Standard and the Dell OMSA i
Question
•
PowerEdge Hardware General
Community Accepted Solution
Closed
Hey y'all, Was looking into upgrading the RAM in my R620 and having a bit of difficulty determining the supported memory configurations using dual Intel Xeon E5-2640 processors. Based on the owners manual revision 5.0, I should be able to support up to 1.5TB via LRDIMMs - but based on Intel's specs
Question
•
PowerEdge Hardware General
Community Accepted Solution
Closed
Hi all, I bought this server for educational purposes. This is my first server but i cannot get it to install server 2012 r2 ( is supported according to dell) but i can get it to updates and install server 12. I added pictures. Can some one help me in de right direction please. I tried boosti
Question
•
PowerEdge Hardware General
Community Accepted Solution
Closed
Hi Support I have one host model PowerEdge R910 with CPU 16 CPUs x Intel(R) Xeon(R) CPU E7520 @ 1.87GHz VMware is 6.0.0 Update 3 (Build 7967664) now we are using memory 4 GB * 64 slot part# is “M393B5273CH0-CH9” we plan to upgrade to 8 GB * 64 part# isM393B1K70CH0-CH9 just I need your confirmat
Question
•
PowerEdge Hardware General
Community Accepted Solution
Closed
Hi Everyone,We have a M1000e chassis with 2 Brocade M6505 FC IOMs (B1/B2) and 9 working blades (M620/M630). The Brocades have 12 port licenses from which 1 is available. Brocades have DPOD mode enabled.The switchshow command shows active ports as 'N16 Online FC F-Port ' and the unused but licensed p
Question
•
PowerEdge Hardware General
Community Accepted Solution
Closed
Hi, We upgraded memory to our PowerEdge R730 , ESXi 6.0.0 production server. Before upgrade it has 16 x 8GB of RAM, DDR-4, single Rank, RDIMM modules, installed in A1 to A8 and B1 to B8 sockets. We added 8 x 16GB RAM , DDR-4, single Rank, RDIMM modules, and installed in A9 to A12 and B
Question
•
PowerEdge Hardware General
Community Accepted Solution
Closed
Hello, I inherited a FX2 which has an FN410s module installed, which is not our standard configuration for most things so i'm not super familiar with those.. Our security scans are alerting about setting the SNMP community string on the IPs of the FN410 modules, but I don't see anywhere in the UI f
Question
•
PowerEdge Hardware General
Community Accepted Solution
Closed
Lost our iDRAC license on one of our servers. I have over +300 licenses in the digital locker. Is there a way to easily search for the key? I do have the service tag from OME.
Question
•
PowerEdge Hardware General
Community Accepted Solution
Closed
Hello @Dell-ErmanO, Sorry to mention you but my topic is about this answer you wrote in 2021. I developped this Docker container which is managing fans of Dell PowerEdge servers via IPMI commands. To answer this issue, which seems to be the exact same as the topic you answered in 2021, I would nee
Question
•
PowerEdge Hardware General
Community Accepted Solution
Closed
Do these NIC's support RDMA and if yes then RoCEv2 or iWARP? Multiple R740 server have the follow cards: Intel Ethernet 10G 4P X550/1350 rNDCIntel Gigabit 4p X550/1350 rNDC Intel(R) Ethernet 10G 4P X710/I350 rNDCIntel(R) Gigabit 4P X710/I350 rNDC Which type of RDMA is supported?
Question
•
PowerEdge Hardware General
Community Accepted Solution
Closed
Hi All, I have searched high and low for a reference to this interesting situation to no avail. I have a EMC T440 that originally came with a single Xeon Silver 4110 CPU. I have since added a second processor - primarily to gain access to the single PCIe x16 slot tied to CPU2. Th
Question
•
PowerEdge Hardware General
Community Accepted Solution
Closed
is BOSS-N1 supported on 15 Generation PowerEdge server ? R750?
Question
•
PowerEdge Hardware General