Search

Hi, I have issue, I upgraded my ram and hard drive about 3 weeks ago. The server worked normally until yesterday. The situation is that it cannot boot into the operating system and stops at this screen. Can you guide me to fix it? Thanks!

Dear Guys, I have multiple servers at my data center like R740 and R350, while checking for updates, some servers shows to update the iDRAC from v6.xx to v7.xx and the strange thing that some other servers NOT showing this update. So, I downloaded iDRAC v7 manually then apply it to the servers. Aft

Scenario: Windows server 2012r2 ( a new Windows server 2019 standard being built to replace it but the question will be the same), when OMSA and ISM are installed, and the IDRAC has a enterprise license there are 3 network connections showing in the OS. They are LOM1, LOM2 (set to disabled), and the

My Poweredge server does not detect the two 200GB SSDs. They are Dell Enterprise certified SSDs. I am getting the following error: IDRAC Settings CBL0009: Backplane 1 connector A0 is not connected. CBL0009: Backplane 1 connector B0 is not connected. UEFI016: One or more boot drivers reported iss

Hello, regarding the problem with iDRAC6 on the R610 device, I am new to the server, so I am asking for help. I have iDrac configured for my home network (Standard 192.168.0.120), but it does not find the website in the browser, the IP responds to pings, the Bios has been updated to the latest versi

Am considering purchasing an R640 with 10 bays. I would like to have some of the bays support NVME. Is my understanding correct that as long as I purchase an R640 with 10 bays I only need to purchase a few cables to add the NVME option to 4 or 8 of the bays. ( I will not need 10 NVME bays ) Eithe

Is it possible to add a PCIe card with Thunderbolt 2 to a R610? Dell has a card 7HMHP THUNDERBOLT that I am wondering if it could work. Thanks. Clay  

Hi, First time writing a post here. We recently upgraded our perc card in our PowerEdge R740 from PERC H740P Adapter to PERC H750 Adapter. A new virtual disk on perc H750 has been created and is live:   On the Windows Server 2019 OS I am unable to view the unallocated disk. Any su

Hi guys we did some hardware upgrade on a Dell R410 Rev2 model recently it had 2 CPu quadcore and 48GB DDR3 ECC 1333Mhz ram with 3 HDD SAS 10K 146GB.. So we bought some cheap parts to upgrade it a litle... We bought cheap Samsung 128GB DDR3 ECC 1066mhz on 8x16GB ddr3 slots.. and 2 XEON X5675 3.

Hi all, The current setup in my office is running a DELL R630 with Intel Xeon E5-2609 v3 chip. I was informed that CVE-2022-26006 affected the Intel® Xeon® Processor E5 v3 Family, as outlined in Intel's security advisory(https://www.intel.com/content/www/us/en/security-center/advisory/inte

Hi,Currently, I used Dell power edge r630.- raid controller: PERC H330 Mini (Embedded) with RAID 1 for 02 disks.- firmware version: 25.5.9.0001- driver version: 7.719.02.00 we got check consistency every 10:00 Saturday.I checked on controller, virtual disk but didn't find any setting to set schedul

I need the DNS iDRAC name to update automatically. (under iDRAC settings -> Connectivity -> Common Settings-DNS iDRAC Name*) I can edit the DNS iDRAC name, but want it to pull the name automatically from DNS. The Auto Config Domain Name is enabled. These steps have been completed. 

We have some Dell PowerEdge R740 servers with added GPU cards presently serving in a role as automated test systems. Specifically, we have need for end-user OSs on these particular systems as they're doing UI testing a GUI application.We already have Windows 10, fully updated, on these systems, but

Hi everyone, I have confirmed that it is not already in the supported OS. If it can be installed, how can I do it?

Using PowerEdge T330 with perc h730 controller. Have existing disks in server but need to remove the raid configuration and then rebuild raid 1. Will the existing disks running Server 2016 still boot.

I am trying to install an LSI 9207-8e HBA in my Dell R630 but I get an exception in the UEFI pre-boot environment with a crash occurring in the DxeCore.efi (see picture below). The system works perfectly without the card. I updated all the drivers (BIOS 2.13.0 and LCC/iDrac 2.82.82.82) but that did

it's basically the title, the server is dell PE r750xs raid card: perc 755 front  hard disks: 600gb SAS when booting the ESXi I don't have the perc as an option when downloading the OS. 

Good evening everyone I have a huge problem with a T150 server. In practice I can not install Windows server 2019 on the Poweredge T150 server, I start the installation from the LCC the ISO starts but when I have to select the partition to install the Operating System I do not detect any HDD. H

Hi, y'all, sorry about the username, but every name I try says 'Username in use", so by just using a bunch of random letters, there'll be absolutely no possibility of that username being used lol Anyway, to the question in hand. I have a PowerEdge T710 with 6 1TB Hd's setup as RAID 5, and last yea

Hello all, I'm having trouble of restoring win server 2008, can anyone help me. First of all, i got the Power Edge 2900 running raid 1 with 3 disk. Power outage happened, and 2 disks are gone -slot0 and slot1 (both flash yellow led), and controller shows lost configuration, no VD configuration fou