Search Results (261)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
Hello, Trying to configure our Compellent to send alerts for volume usage. I have thresholds set with the proper percentages and I have the user preferences setting for "threshold alerts" checked. Email is configured and sends fine. I get nightly reports and some email exception alerts so I know tha
Question
•
Compellent
Community Accepted Solution
Is there a way to check a hard drives firmware from CLI? for example... #> shellaccess developer #> disk show #> disk get 1 <<<< this shows some useful information but i cant find firmware anywhere I know i can see firmware from the web gui. Any help
Question
•
Compellent
Community Accepted Solution
Hi guys! I'm trying to change my Dell Storage SCv3020 IPv4 address to another one since I'm moving this unit from test to production. Both test and production of course has different VLANs and IP subnets for iSCSI and management. However, I'm not able to to so and was hit with a somewhat weird erro
Question
•
Compellent
Community Accepted Solution
Hello, How add new sc420 to storage sc5020(without any enclosure). I dont see information on documents, We must shutdwon storage And Connect sc420 to storage or Connect sc420 to storage And power on sc420 ?
Question
•
Compellent
Community Accepted Solution
Bonjour,We just migrated our virtual environments to vsphere 8.0.2 and unfortunately the vsphere plugin (6.1.1) no longer works Is there a dsitv update planned to fully support Vcenter 8+Cordialement Michel
Question
•
Compellent
Community Accepted Solution
Hi, Populated our SC5020 with a bunch of drives, all Dell SSD 1.92TB drives. I know they are drives made by Samsung.Product ID is MZILS1T9HEJH0D4. Got a few that are unmanaged and after some digging, those have a different firmware version which is CQL5.I am trying to figure out how to update the f
Question
•
Compellent
Community Accepted Solution
DELL FS8600: Is FS8600 affected by CVE-2022-38023 ? Recently, a serious vulnerability has been discovered in our intranet AD. Will CIFS on FS8600 be affected after the AD upgrade patch? Is there any documentation and related solutions. Thank you!
Question
•
Compellent
Community Accepted Solution
Closed
A few days ago we bought a batch of hard drives PN: W6YC4 FW version PE43 to replace the same drive models but with FW PE47 revision on a SC8000 unit. When I installed them on the storage, they were rejected with an incompatible drive error, I have attached a screenshot from the storage manager. Cou
Question
•
Compellent
Community Accepted Solution
Closed
I have 2 SCv2000 Compellent enclosures which were purchased at the same time and configured identical. I would like to move the disks from one enclosure to the other. We are only using a single enclosure now and would like to maximize available storage in the enclosure.I removed the drives fr
Question
•
Compellent
Community Accepted Solution
Closed
Hi, We want to add some extra ssd's to our sc3020.You can find a lot of ssd's when you google for the partnumber, some are 'refurbished' and some 'new pull' We have active support on the sc3020, I'm wondering does the support cover adding extra ssd's ?I can't really find the official dell policy.
Question
•
Compellent
Community Accepted Solution
Closed
Good afternoon I am wondering what might cause a Dell hard drive to have its attribute 120 DriveLine show up as 1 (0) Unknown, instead of EnterprisePlus? Getting the error "system is unable to accept disk....with serial....and Dell part number xxxxx because disk drive line Unknown is not compatible
Question
•
Compellent
Community Accepted Solution
Closed
HI,I'm a newbie to dell hardware.Next week I have to upgrade vsphere 6.7 to version 8.1 on an infrastructure composed of 6 PowerEdge MX740c and one scv3020 storage connected in fc.I've read the Dell EMC SC Series: Best Practices with VMware vSphere guide and from what I understand I need to do these
Question
•
Compellent
Community Accepted Solution
Closed
Hello.I have SCv3020 storage, and I am tried to setup 5 of hard drives then it gives me error:No disks eligible to be added to this disk folder could be found.I attached screen shot of them. Checked the unassigned reason, and it says: Unlicensed.Please give me some information how can I solve the so
Question
•
Compellent
Community Accepted Solution
Closed
How to reset admin password on Dell SCV2020 I have ip address and MSC How can I do it
Question
•
Compellent
Community Accepted Solution
Closed
Hi all Our company uses a Dell Storage SC4020. It have already 4 10k disks downed when we discovered. We want to repair the storage, but the os of the storage can't be normal after the any controller restart. We have tried to replaced the controllers and a equipment case.&nb
Question
•
Compellent
Community Accepted Solution
Closed
Hi Folks I replaced the batteries 3 days ago on my SCv2020, however, the message still showing. After replaced no messages sows that the batteries were replaced, is that correct? Is there anything that I need to do to SCv202 recognize new batteries? Thank you
Question
•
Compellent
Community Accepted Solution
Closed
Hello There we have aquired a Dell SCV3020 using our company buy back program. The Customer who we bought from told us that they did a factory reset using the dsm client. I am trying to configure the compellent and i am unable to do so. i have a dhcp network, the IDRAC for each controller get an
Question
•
Compellent
Community Accepted Solution
Hi, I was running out of space in my system and decided to buy new disks to increase the current pool with 15 KRPM disks. Since Dell is not selling disks anymore for the SC product line, I decided to give it a try with a third-party vendor. I have installed 3 SAS disks 900 GB 15 KRPM, 2.5",
Question
•
Compellent
Community Accepted Solution
Hi, can anyone help me to resolve issue It appears after moving SC7020 to different datacenter and different vlan&ip on replication/livevolume tab there is "connectivity information" window. So there are 8 connections. 4 UP and 4 down. All down have the same status message: IPC Path is not fo
Question
•
Compellent
Community Accepted Solution
Hi guys, I would like to ask for help regarding our Dell storage EMC SCV3020. We have discovered that one of the disks is defective, and we have also found out that the data on the disk has not been evacuated. How can we solve this issue so that we can proceed with the disk replacement?
Question
•
Compellent