Search

Folks After some research on internet I got it access on the Storage. Now I have a list of command. Anyone could help me, how can I reset the Admin password or factory reset the Storage by command line? I can´t access the Storage from Storage Manager for Windows Thank you    

Hi Folks, I am new on the forum, I inherited a SVC2020 and 2 hosts. However, the person that leaves the company didn´t leave the password or any documentation to access the Storage or the hosts. So, I would like restart everything again, already the systems never be used before. The person, only st

Hi Everyone, I have this Dell FS7600 which was donated by a company. And we are looking to reset this device. Service Tag I am able to get into the BIOS and I have set the IP Address to static. I am able to connect to the BMC via web. However the default Dell passwords do not work. How can I re

Yesterday our Windows 10 machines were upgraded to the 1903 release of Windows 10 & since then are unable to connect to our FS8600 NAS unless SMBv3 is disabled. Are there are there other settings that can be adjusted to allow for our Win10 1903 clients to connect to our FluidFS NAS head without

We have Dell FS8600 v.6 appliance includes SC4020 & SCv3020 iSCSI back-end, it is using NAS Pool across 2 Storage Center. Now we need take out SCv3020 from FS My question : How do delete NAS Pool in DSM before remove any SC in back-end? (NAS Pool is empty without any FS Volume was create before

Hi all, I could really use some help and insight. The company I work for uses a 3rd party vendor for hosting our data. Unfortunately, trying to pry information from this vendor is like pulling teeth. We are experiencing an issue wherein the Access Date for the filesystem is always being changed. Ou

Dear all, My customer ha a SCv2020 with 7 x 1.2 TB 10K configure with RAID Dual Redundant Level RAID10DM/RAID6-6. Please help on my question as: 1. Can I do add disks during the storage system running? Customer data will be OK? 2. I have to install the new 8 x 1.2 TB 10K disks to the system. Ple

We originally bought one MD3200 array for our on-prem backup storage and one for our DR site. We recently replaced the MD3200 array on our on-prem site and would like to use the old array to double our storage at our DR site. Can we daisy chain two arrays together? Each controller on each array has

Hi there We have 2 Dell MD3200 dis shelves. We have created a new virtual disc, which we have some virtual machines on, its not until we deployed it with many users that we noticed the performance is not correct. Upon further investigation we have noticed that the cache has the following notice

We are using BackupExec 16 and the tape library TL2000 (ULT3580-HH5) is connected to my Windows 2012 R2 via SAS interface. No medium changer is displayed in Device Manager, just Tape Drive. Therefore, no Robotic Library is shown in BackupExec 16. Current situationTape drive driver: 6.2.5.5Changer B

Hi, Is there any way to update the Storage Center Version without internet? Current version: 6.6.5  I have added storage Center to Dell Storage Manager client(DSM). But this DSM sits into the lab where we dont have the internet connection.  I have downloaded the updated storage cente

Hi all! I have MD1220 (connected to MD1200 that is connected to MD3600f) with 10 Ultrastar C15K600 (HUC156060CS4204 firmware EK11 ) HDD. MDSM tells that "Status: Incompatible, Cause: Firmware error trying to use physical disk". So technical support told me to update disk firmware and gave me a

Hello Forum, Does anyone know if the MD3800i 10GB can auto sense down to 1GB connectivity? I am unable to fine a reference to this. thank you in advance. MB

Hi, We have a PowerVault MD3200i and we've bought 5 new disk SAS 4Tb. to support the new disks i must upgarde the firmware to 08.20.24.60 with mdsm 6.5.0.1. after upgrade to 08.20.24.60 our MD3200i can't be managed with mdsm 6.5.0.1. in the menu Tools--> Manage store is greyed. An

Hi, I am getting the below auto-generated URL when i try to Register the VASA Provider using option Register VMware vCenter Server in DSM. https://Dell Inc.:3034/vasa-provider/vasa2/vasa-version.xml I am using the DSM Build with version : 16.3.1.301. Steps: 1. Deployed the DSMBu

All, I have a PowerVault NX3000 with Windows Storage Server 2008 R2 installed on it. Can an in-place upgrade to Storage Server 2012 R2 be accomplished?  Any known driver problems? Thanks in advance for the help, Jamie

Cross posting from en.community.dell.com/.../20002862 as requested by Dell-Shivendra K. We are receiving odd errors being sent via Open Manage Essentials regarding our CX3 yet when looking on the CX3 directly through Navisphere, there's nothing wrong. Just trying to figure out what's causing these

Hi We have a MD3200i with two RAID controllers each with 4 ports (so 8 ports total), after a recent power cut (longer than UPS could help so servers shutdown) everything seems to have come back online fine but the Power Vault seems to have a problem with its iSCSI ports. The two RAID controllers a

Hi, I want to replicate across the WAN between our Equallogic SAN (both PS6210) At the moment, our networking dept will not allow ISCSI traffic to route out through the normal network across the WAN, so i wanted to see if I could do something different. Our ISCSI subnet is 10.0.16.x and 10.0.3

We are going to provision a storage from Dell compellent SC 4020 for 48TB to a new environment, we end up in a confusion to decide with the size of LUN. Please suggest. Option1 : 24 * 2 TB =48 TB   Option 2: 8 * 6 TB =48TB Model : SC 4020 Host details : Microsoft Hyper –v 2012 ( it ca