10 Posts
0
620
How to change hostname of SCG
Running SCG 5.14.00.16.
I double checked the settings of the web UI and I see no possibility to rename it, not to mention I couldn't find anything in the official documentation.
Any information would be helpful, thank you.
DELL-Charles R
Moderator
Moderator
•
3.4K Posts
1
May 12th, 2023 10:00
Hello vrbitman,
You should be able to get into the appliance VM and you can use Yast to change the config.
See page 21 step 13 : https://dell.to/42O4NZk
I don't have any specific documentation for it but it should work.
Similar post you may like to look over :
https://dell.to/3O5jDX7
vrbitman
10 Posts
0
July 21st, 2023 07:00
Thanks Charles.
I launched yast2 from the command line and updated the hostname in 2 places:
1. System → Network Settings → Hostname / DNS
2. Network Services → Hostnames
In the second section there were multiple entries, I only touched the line that corresponds to the hostname displayed at the command prompt.
Hopefully this is sufficient and I didn't break anything.
I did reboot the appliance and connectivty looks ok with all services up and running.