8 Posts
0
1721
ESXI Host show only a single ISCSI Path
Hi,
i have a cluster of 3 ESXI 5.5 hosts, each host is configured with 2 vmkernel adapters for ISCSI.
After restarting the first ESXI, I found that there is only one path left for each ISCSI LUN.
On the other hosts it show two paths for each ISCSI LUN.
i tried to restart the host, rescan the target, etc. but nothing works.
MMASLOUH7
8 Posts
0
September 20th, 2021 16:00
Hello,
i fixe it by configure port binding ^^
https://www.codyhosterman.com/2017/07/setting-up-iscsi-port-binding-with-standard-vswitches-in-the-vsphere-web-client/