4 Posts
0
1205
Bios Update on Wyse 5070 WES using Wyse Management Suite
I have multiple 5070 Windows 10 thin clients and I would like to be able to push out the Bios updates to these machines but am having issues doing so. If I manually bring a flash drive to the thin clients I can get the latest update to apply correctly. If I try to apply the update from the App Policies/ Thin Client it will not update I found something on page 91 of the 4.0 admin guide that states:
NOTE: You can update BIOS using the standard application policy. You must use /s/f/p=Fireport as install
parameters to update BIOS.
NOTE: If you are using bitlocker on your Windows system, you can update BIOS using the standard application policy.
You must use /s/bls/f/p= as install parameters to update BIOS.
If I put those in the Installer Parameters it still will not apply, it just hangs at the blue "Your system administrator is now reconfiguring this client" but doesn't actually do anything.
Any assistance would be appreciated
buffalobound
3 Apprentice
3 Apprentice
•
712 Posts
1
January 30th, 2023 04:00
Do you have spaces between parameters?
/s /f /p=Fireport
Lance73
4 Posts
0
February 3rd, 2023 06:00
I did not as I copied the info directly from the Wyse Admin guide, I will try that and see what happens
Lance73
4 Posts
0
February 3rd, 2023 08:00
I was able to successfully update the bios on 4 test machines by putting a space between those parameters so to recap Wyse 50570 WES thin clients that need to have their bios updated need to make sure you have a space between the /s /f /p=Fireport in the installer parameters