Start a Conversation

Unsolved

This post is more than 5 years old

26631

April 8th, 2015 18:00

Update bios without windows

How do I update my Dell T7601 bios without installing windows (it runs linux right now)?

Thanks,

Dennis

1.8K Posts

April 13th, 2015 13:00

Hi,

Do you mean the T7600 or the T7610?  I don't see a T7601 on the Dell Support pages ( http://www.dell.com/Support ).   

For the T7600 you can go to it's support pages, then click on the Drivers and Downloads section.  Once that loads you can change the operating system filter to "Not Applicable".  That will load the Windows / DOS / Exe file that you should be able to run in Linux.  (there is actually and option for Ubuntu 11.10  as the OS filter, but don't know what you are running.) 

There should be instructions on how to install that along with the file that downloads.  If not, I'm sure you can find instructions either on our Linux boards or you can Google it.

Hope this helps.

Todd

2 Posts

November 27th, 2019 11:00

I've run into a similar issue, but for a Dell Inspiron 3482. Support page is: https://www.dell.com/support/home/us/en/19/drivers/driversdetails?driverid=p4cc6&oscode=naa&productcode=inspiron-14-3482-laptop

When looking for BIOS updates, the only file available for download is "Inspiron_Vostro_3482_3582_3782_1.6.0.exe". Contrary to what is mentionned on the support page in section "Updating the BIOS from DOS (Non-Windows users)", this executable cannot run from DOS. Running this file from a bootable DOS drive, the only thing I've got is "This program cannot run in DOS mode".

How can I update the BIOS without Windows?

2 Posts

November 27th, 2019 23:00

I managed to flash a new BIOS on Dell Inspiron 3482. Below is the procedure I followed, which is not documented on the support page. This procedure can probably be used to update the BIOS of other Dell models as well.

  • Plug the power cable (system must be on AC power)
  • Download the .exe file (for exemple Inspiron_Vostro_3482_3582_3782_X.Y.Z.exe), save it on a USB key
  • Boot the system (in UEFI mode) and press F12 when the Dell logo is showed.
  • Choose "BIOS Flash Update"
  • Choose "FS1:" (FS0: is the EFI partition, FS1 is the USB key filesystem)
  • Choose the .exe file
  • Select "Begin Flash Update". The flashing takes some time (progress bars are displayed). Once done, the system reboots.
  • When the system is rebooted, press F2 to enter the BIOS setup and check that the version of the BIOS has been updated.

Warning: the BIOS Flash Update program won't allow to flash an older version of the BIOS.

1 Message

November 15th, 2020 16:00

Something so simple you'd think this would be the first solution provided.

2 Posts

August 1st, 2022 05:00

Hey, I did this - thanks for the inspiration.
Easy enough in fact - clearly the BIOS has a little MS-DOS implementation on board.
So I've updated to 1.14.0
Sadly though, I've still had random shut-downs that seem quite similar to the earlier ones.

2 Posts

August 1st, 2022 05:00

Sorry - I was referring to issues like this which affect me:
https://askubuntu.com/questions/829635/sudden-shutdown-ubuntu-16-04-dell-inspiron-13-7000

162 Posts

August 21st, 2022 23:00

Steps are given below-

Step 1
Determine the correct BIOS for your computer. As your computer boots, press the correct key, which will be displayed on the initial boot screen, to access your BIOS. Your BIOS is determined by your motherboard manufacturer. The motherboard manufacturer will be listed on the first screen of the BIOS near the top of the screen. Typical BIOS entry keys include F2, Esc and Del.

Step 2
Download the BIOS update. You will need access to the Internet to do this. You can use a public computer or a friend or family member's computer. The exact download location will vary based on the computer and motherboard manufacturer (see Resources).

You can also visit your computer manufacturer's website, such as HP, Dell, or Compaq, and enter your computer make and model for a list of driver and BIOS updates specific to your computer. Visit the Support section of the manufacturer's website in order to find the update.

Step 3
Choose the version of the update you want to use. For instance, most manufacturers offer BIOS updates for floppy disks or other removable media. Floppy disk updates are still common, but many computers no longer have 3.5" floppy disk drives. Choose to download the removable media version so you can place it on a flash drive.

Step 4
Open the folder you just downloaded, if there is a folder. There will be a ReadMe.txt file. Read this to determine the specific installation instructions for the BIOS upgrade. Some BIOS upgrades require you to unzip certain files and only place a portion of the downloaded files on your installation media.

If there is only an installation file, copy it to a floppy disk, flash drive or CD. The first two are easier and will not require CD burning software.

Step 5
Insert the media with the BIOS upgrade into your computer. Restart the computer and press "F12" to access the boot options menu. (If your computer is already set to boot from your chosen media, you won't have to press F12.) Choose your media from the boot menu to continue.

Step 6
Allow the BIOS update to run completely. Remove the installation media when prompted and allow the computer to automatically restart.

 

Greeting,

Rachel Gomez

1 Message

December 21st, 2023 11:43

hey,

i got a .exe file for the bios update.

when i tried to run it a error appear. saying the device should have more than 10% battery

my battery has a permenet issue so my system can't recognize the battery.   

so how can i bypass this error without replacing the battery.

my model is latitude 3440

(edited)

No Events found!

Top