Dell PowerConnect 3248, v. 1.31, A01
AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.General Discription
The Dell™ PowerConnect™ Switch Manager for OpenView Network Node Manager (NNM) is specifically designed to support the efforts of technical staff responsible for network management and maintenance. This software provides a user-friendly interface for managing various Dell network devices
with HP OpenView NNM under Microsoft® Windows NT®/2000
This software supported the PowerConnect 3248 Fast Ethernet Managed Switch and the PowerConnect 5224 Gigabit Ethernet Managed Switch.
The Dell PowerConnect Switch Manager allows you to monitor the activity on any switch, or designated port, and automatically respond if the traffic load exceeds predefined parameters. It provides all the tools needed to monitor the network and make the changes required to avoid major crises ahead of time.
The Dell PowerConnect Switch Manager is based on Simple Network Management Protocol (SNMP), providing graphic-based interactive management of Dell’s intelligent Ethernet switch systems. The device modules display the front panels of the managed device showing port status, and provide functional control for its ports and other advanced features.
The Dell™ PowerConnect™ Switch Manager for OpenView Network Node Manager (NNM) is specifically designed to support the efforts of technical staff responsible for network management and maintenance. This software provides a user-friendly interface for managing various Dell network devices
with HP OpenView NNM under Microsoft® Windows NT®/2000
This software supported the PowerConnect 3248 Fast Ethernet Managed Switch and the PowerConnect 5224 Gigabit Ethernet Managed Switch.
The Dell PowerConnect Switch Manager allows you to monitor the activity on any switch, or designated port, and automatically respond if the traffic load exceeds predefined parameters. It provides all the tools needed to monitor the network and make the changes required to avoid major crises ahead of time.
The Dell PowerConnect Switch Manager is based on Simple Network Management Protocol (SNMP), providing graphic-based interactive management of Dell’s intelligent Ethernet switch systems. The device modules display the front panels of the managed device showing port status, and provide functional control for its ports and other advanced features.
To view all drivers for your PowerConnect 3248, go to Drivers and downloads.
Recommended
Loading the latest available version of the driver...
This is the latest Dell validated version of this driver
This is not the latest Dell validated version of this driver
PWRNTSM.zip | 5.1 MB
This is a large file. Depending on your connection speed, it may take some time to download.
File Format:
Extracts files directly to local disk
File Name:
PWRNTSM.zip
File Size:
5.1 MB
Format Description
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
To ensure the integrity of your download, please verify the checksum value.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.
Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Version
1.31, A01
Release date
25 Jul 2002
Download Type
Applications
Category
Network, Ethernet & Wireless
Importance
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Supported Operating Systems
Not Applicable
Looking for a different OS? View the list of Dell supported operating systems
Installation instructions
*****This file contains a compressed (or zipped) set of files. You will
need a compression tool such as WinZip. Download the file to a folder on
your hard drive, and then run (double-click) it to unzip the set of files.
Follow the instructions and then use the Upgrade Instructions to complete
the installation.
Software Installation
The setup program will install the Dell PowerConnect Switch Manager This
program decompresses files and copies them to a location you specify on
your hard disk. During installation you will be prompted to assign the
program group.
NOTE: Install HP OpenView NNM on your platform before installing this
package. You will be asked to provide your OpenView directory during the
installation process for the Dell PowerConnect Switch Manager.
Installation steps:
1. Start Windows.
2. Use the NNM Services Stop command to stop all HP OpenView NNM
background processes, if any. (This has the same effect as executing
ovstop from the command line.)
3. Download DellPwrConnectSwitchMgr.exe from Dell’s support website (
http://support.dell.com). Copy the self extractable
DellPwrConnectSwitchMgr.exe to the temp directory.
4. Type DellPwrConnectSwitchMgr.exe at the command prompt and unzip to
the temp directory.
5. Type SETUP at the Command Prompt.
6. Click OK to start setup.
7. Follow the on-screen instructions to install the software.
need a compression tool such as WinZip. Download the file to a folder on
your hard drive, and then run (double-click) it to unzip the set of files.
Follow the instructions and then use the Upgrade Instructions to complete
the installation.
Software Installation
The setup program will install the Dell PowerConnect Switch Manager This
program decompresses files and copies them to a location you specify on
your hard disk. During installation you will be prompted to assign the
program group.
NOTE: Install HP OpenView NNM on your platform before installing this
package. You will be asked to provide your OpenView directory during the
installation process for the Dell PowerConnect Switch Manager.
Installation steps:
1. Start Windows.
2. Use the NNM Services Stop command to stop all HP OpenView NNM
background processes, if any. (This has the same effect as executing
ovstop from the command line.)
3. Download DellPwrConnectSwitchMgr.exe from Dell’s support website (
http://support.dell.com). Copy the self extractable
DellPwrConnectSwitchMgr.exe to the temp directory.
4. Type DellPwrConnectSwitchMgr.exe at the command prompt and unzip to
the temp directory.
5. Type SETUP at the Command Prompt.
6. Click OK to start setup.
7. Follow the on-screen instructions to install the software.
Need help with network connection issues?
Find a solution in Dell's network troubleshooting and usage guide.Drivers help and tutorials
For more downloads go to the Drivers and downloads.
For help on using the information on this page, please visit Driver Help and Tutorials.