PowerConnect 7000 Series, Firmware Version v5.1.3.7, A16
Restart requiredAUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
Please refer to the Release Notes for fixes available in this release. "Release Notes" are included in the zip file - "PowerConnect_5.1.3.7_Release_Notes".
Please follow the detailed software update instructions included in the zip file - "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.3.7 Firmware.pdf".
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Release 5.1.3.7 contains fixes for the following issues:
622897 PC8024 - SNMP Product Status OID does not change after a fan/power failure 660307 PC6248P - No Receive Discards counter available 674190 PC8100 - Stack member unit crash with task "hapiMcAsyncTask" 679802 PC7024 - Software routing when using secondary SVI 680596 SNMP OID not incrementing snmpEngineBoots value 687093 nimTask crash on PC8024 stack while routing traffic with OSPF enabled 690946 4x M8024-k switches, one intermittently doesn't join a stack after reboot from CLI 705979 dot1sBpduReceive(): Discarding the BPDU, cannot get buffer from buff pool 707212 8100 stack member reboots with task bcmRPC. Firmware 5.1.1.7 708516 PC81xx - IPMapForwardingTask and Interrupt Thread crashing switch 5.1.1.7 709801 M8024k - Error with temperature status reporting 712702 Using WebUI to set fields Dynamic VLAN creation and GVRP Registration issue 713435 OpenSSH Vulnerability Issue - Fix for: CVE-2012-0814 716307 crashdump - (null) XXXXX - possibly SSH related 722543 After failover vlan is getting associated with physical interface. 722543 After failover the spanning-tree status of the physical interface is transitioned from discarding to forwarding. 726597 Source MAC address from LLDP frames learned in bridge address table 728001 PC8100 - WebUI showing medium temp, while the CLI was showing good temp. 734385 MIB Walk on M6348 and M8024-K running latest firmware not returning the same results (5.1.2.3) 735710 PC81xx - Switch crash when VRRP configuration applied. 749137 IPv6 PIM Multicast traffic stops working with MFC-V6 error messages
Dell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Please refer to the Release Notes for fixes available in this release. "Release Notes" are included in the zip file - "PowerConnect_5.1.3.7_Release_Notes".
Please follow the detailed software update instructions included in the zip file - "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.3.7 Firmware.pdf".
(1) Download the zip file - PC7000v5.1.3.7a16.zip (2) Extract the image file "PC7000_M6348v5.1.3.7.stk" from the zip file (3) Install the image to the switch by following the upgrade procedure "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.3.7 Firmware.pdf" extracted from zip file.
Reboot will be required
Need help with network connection issues?
Find a solution in Dell's network troubleshooting and usage guide.