Intel Application Accelerator RAID Edition, v.4.5.0.6515, A01

AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
First Initial Release.
To view all drivers for your Precision 370, go to Drivers and downloads.
Recommended
Loading the latest available version of the driver...

This is the latest Dell validated version of this driver

This is not the latest Dell validated version of this driver

R82876.exe | 309.14 KB
Enter the Service Tag of your device to check the compatibility of this download with your device.
This is a large file. Depending on your connection speed, it may take some time to download.

File Format: One or more self extracting disk images inside of a self extracting zip
File Name: R82876.exe
File Size: 309.14 KB
Format Description
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available

Find more updates. Use SupportAssist to find all the latest driver updates for your device.

Fixes & Enhancements

- Corrects issue where Windows 2000 may not resume from Hibernation when a RAID Array is configured.
Read More

Version

4.5.0.6515, A01

Release date

23 Feb 2005

Download Type

Driver

Category

Storage

Importance

Recommended
Dell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.

Additional details

Show All | Hide All
Custom Instructions for R82876.exe:

At the beginning of the operating system setup, press F6 to install a third party SCSI or RAID driver.

1. When prompted, select 'S' to Specify Additional Device.

2. When prompted, insert the floppy disk you created in step 2 and press Enter.

3. At this point you should be presented with a selection for one of the following depending on you hardware version and configuration:

- Intel(R) 82801FR SATA RAID Controller
- Intel(R) 82801FR SATA AHCI Controller

4. Highlight the selection that is appropriate for the hardware in your system and press Enter.

5. Press Enter again to continue. Leave the floppy disk in the system until the next reboot as the software will need to be copied from the floppy disk again when setup is copying files.

Drivers help and tutorials