Hitachi DK23CA 10/20/30GB Notebook Hard Drive, v. A0G3, A01

AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
Hitachi DK23CA 10/20/30GB Hard Drive (A0G3) Firmware Update
To view all drivers for your Latitude C800, go to Drivers and downloads.
Recommended
Loading the latest available version of the driver...

This is the latest Dell validated version of this driver

This is not the latest Dell validated version of this driver

D4E08401.exe | 929.5 KB
This is a large file. Depending on your connection speed, it may take some time to download.

File Format: One or more self extracting disk images inside of a self extracting zip
File Name: D4E08401.exe
File Size: 929.5 KB
Format Description
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available

Find more updates. Use SupportAssist to find all the latest driver updates for your device.

Fixes & Enhancements

* Reduction of frequent acoustic “clicking” noise driven by hard drive load/unload mechanism.
Read More

Version

A0G3, A01

Release date

14 Dec 2001

Download Type

Firmware

Category

IDE/EIDE

Importance

Optional
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.

Additional details

Show All | Hide All
* Click on the D4E08401.EXE file and select "Open" then "Setup".
* Follow the instructions given in the DOS Window to create a bootable
floppy.
* Close all applications, and restart system with the floppy inserted.
* Wait for system to boot until the utility software screen appears.
* Enter , and hit Enter key.
Then downloading firmware will start.
* After download is completed, remove floppy diskette, and turn off the
computer.
Wait 5 seconds then turn on the computer.

Drivers help and tutorials