Adaptec PERC2, PERC2/Si, PERC3/Si, PERC3/Di, v.2.7.1.3564, A11

AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This is Adaptec's Controller Management Software version 2.7-1 (build 3564)
To view all drivers for your PowerEdge 2300, go to Drivers and downloads.
Recommended
Loading the latest available version of the driver...

This is the latest Dell validated version of this driver

This is not the latest Dell validated version of this driver

a11ntapp.exe | 9.49 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Download Go to Latest Version
Show details | Download current version instead | View Important Information
File Format: Extracts files directly to local disk
File Name: a11ntapp.exe
File Size: 9.49 MB
Format Description
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
To ensure the integrity of your download, please verify the checksum value.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available

Find more updates. Use SupportAssist to find all the latest driver updates for your device.

Fixes & Enhancements

Fixes -
1) The Boot container is now detectable at low level.
Enhancements -
1) This release now allows for R10 "master drive" rebuilding.
Read More

Version

2.7.1.3564, A11

Release date

28 Mar 2003

Download Type

Applications

Category

SCSI RAID

Importance

Optional
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.

Additional details

Show All | Hide All
These API kits should not be run on system that already has Dell's OpenManage Array Manager running.
PERC3/Di
Default Instructions for a11ntapp.exe:

Dell Online Instructions:
1. Download the file to a directory on your hard drive. The file
downloaded is a self-executable zip file (.exe).
3. Open the self-exectuble zip file.
4. Press Extract to create the seven files; specify desired location.
5. This will create 6 self-extracting files, and one nt_kit.doc file.
* Thorough instructions are in the nt_kit.doc *

Uninstall any previously loaded API kits before installing any newer kit.

This Management Utility (FAST/CLI) consists of the following 6-kits.

1. Dell PERC 2 API
2. Dell PERC 2 Agent
3. Dell PERC 2 CLI
4. Dell PERC 2 FAST GUI
5. Dell PERC 2 SNMP
6. Dell PERC 2 Event Snap In

Install Order:
1)Install the Dell PERC 2 API
2)Install the Dell PERC 2 Agent
3)Install other kit(s) as required.

Install Instructions
Run setup.exe for each kit and follow the instruction on screen.
Back to Top

Drivers help and tutorials