Dell Support Drivers & Downloads Driver File Formats

Driver Details

Link
Intel LS-120 Drive, v. 101, A00
LS-120 Drive Firmare Utility
Release Date 6/10/2002
Importance: Optional
Version: 101,A00

The following formats are available for the file you have selected

File Format: Floppy Download File Download File
File Name:

B6T70600.exe

Description: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
Download Type: HTTP
File Size: 493KB

Previous Versions

No previous version available.

Description

LS-120 Drive Firmare Utility

Level of Importance:Optional

Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.

Important Information

Important Notes: Programming the LS-120 firmware from a disk in the LS-120 is not supported. Please copy the files to your hard drive and run the utility from there. Typical flash time is approximately 3-5 minutes. There is a possibility the flash could take approximately 22 minutes depending on the Hard Drives installed. The unpack utility is DOS based. Run the executable file on a Windows based machine (not IA64), the following files will be unpacked and copied to a standard 1.44MB formatted floppy. Auto.prm C936M924.bin FL16.efi Loader.bin Update.nsh

Compatibility

Systems
PowerEdge 7150
Operating Systems
Not Applicable

Applies to

  • LS-120 Drive

Fixes & Enhancements

This utility updates the firmware on the LS-120 Drive, DP/N 042YKW, used on the Dell PowerEdge 7150 platform. It must be run from the EFI shell.

Installation instructions

            
Hard Drive Floppy Disk Creation for B6T70600.exe

1.	Get 1 blank, formatted floppy disks.
2.	Click the new icon on the desktop.  The Self-Extractor window 
appears.
3.	Click Setup.  An MS-DOS window appears with a message indicating 
that you need 1 floppy diskettes.
4.	Press the [ENTER] key.  A message appears prompting you to insert 
a blank floppy diskette. Insert a floppy disk into the floppy disk drive.
5.	Press the [ENTER] key.  A message appears indicating that all data 
on the disk will be erased.
6.	Press the [y] key and then press the [ENTER] key.  The files are 
copied to the floppy diskette.  Once the files have been copied to the 
diskette a message appears prompting you to insert the second diskette.
7.	Repeat steps 4 – 6 until you reach the end of the diskette set. 
8.	After all the files have been copied to the last floppy disk, 
press the [ENTER] key and the MS-DOS window closes.


The unpack utility is DOS based.  Run the executable file on a Windows 
based machine (not IA64), the
following files will be unpacked and copied to a standard 1.44MB formatted 
floppy. 

Auto.prm
C936M924.bin
FL16.efi
Loader.bin
Update.nsh

Place the floppy in the Ls-120 drive and 
Boot to the EFI Boot Manager Screen
Select the EFI Boot option 
Should see the Device mapping table
Look for the FS#'s to identify the Floppy, CDROM, and Hard Drives
The LS-120 will have a description of Primary Master or Device 00.	
The Hard Drive will have a description of Scsi or Device 80.
The command "map –r" will remap the devices.
If the Device 80 or Scsi is FS1 then type: "FS1:"  to change to the 
hard drive.
Type: "dir" to print a directory to the screen. 
This is the main directory where the files should be copied.
Should also see the dellup Directory.
Copy the five files to the hard drive, (verify fs0 corresponds to the 
floppy drive)
type: "copy fs0:auto.prm" 
the response should be fs0:\auto.prm -> fs1:\auto.prm[ok]

Type: "update" 
the utility will begin the following should appear on the screen.

Beginning Update Process
New revision (file): C936M924
Old revision (ROM): C932M923

Note: If the Old revision number does not appear here then this drive 
cannot be updated ! 

Continue with the update of the Flash-EEPROM? (y/n)
Type: "y"

Loader F/W Revision: 101
Erase Processing
Erase OK
Write Processing
Write OK
Flash Load: OK

The flash has completed and you are then returned to the EFI Prompt.            
        

Checksum

To ensure the integrity of your download, please verify the checksum value.

This is an optional process and is not required for the downloading and installation of device drivers from this site.
MD5:
Not Available
B6T70600.exe
SHA1:
Not Available
B6T70600.exe
SHA-256:
Not Available
B6T70600.exe

By downloading, you accept the terms of the Dell Software License Agreement.