DELL PowerEdge C Intel 82580 1GB Quad Port LAN Mezz Card OP-ROM FW 1.5.56
Restart requiredAUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This is for 82580 gigabit NIC PXE FW on Cloud Product C6200 & C6220
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes - PXE does not get link on Marvell PHY 1512 - Incrorrect value selected in e1000_get_phy_cgf_done and e1000_phy_hw_rest - Legacy PXE boot clear MDICMFG.Destiation bit in network controller
Enhancements - Add Matvell PHY 1512 support to the C2000 SW components - Make PXE check protocol selection bits in NVM
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Step 1. Run "bootutil.exe" in pure DOS first. The total Intel NIC devices in system will show as table below: Please notice that below result might be different by different system configuration.
Port Network Address Series WOL Flash Firmrare Version ==== =============== ======= === ================================ ======= 1 AB9876543210 Gigabit YES FLASH Not Present 2 AB9876543211 Gigabit YES FLASH Not Present 3 AB9876543212 Gigabit NO PXE 1.5.13 4 AB9876543213 Gigabit NO PXE 1.5.13 5 AB9876543214 Gigabit NO PXE 1.5.13 6 AB9876543215 Gigabit NO PXE 1.5.13
Please confirm which port will be updated by checking Network Address above.
Step 2. Run "bootUtil -NIC=X -UP=PXE" Where "X" is the port which will be updated. Please reboot system after flash completed.
Reboot will be required
Need help with network connection issues?
Find a solution in Dell's network troubleshooting and usage guide.