Dell PowerEdge C Mellanox CX3Pro SFP+ Dual Port Mezz Card FW 2.30.8040
Restart requiredAUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
Mellanox FW for ConnectX-3 and ConnectX-3 Pro ver 2.30.8040
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
- DMFS and GRE steering: Rule insertion adjustments - Removed DIF support from reported capabilities in QUERY_DEV_CAP PRM command - Flow control by DSCP priority for IPv4 - DMFS improvements: Insertion scheme enforcement and block loopback for Infini-Band - Added I2C resiliency support - Support for NC-SI over MCTP over SMBus - Added a flash access interface for persistent (non-volatile) configuration support - Added port BW arbitration configuration through the CONFIG_DEV command - Added IP-in-IP TCP checksum offload support - PCI Express compliancy Tx and Rx adjustments - Added support for 40GbE in WoL and pre-OS driver modes
Dell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Download 1. Click Download File to download the file fw-FHFX6.zip. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation 1. Browse to the location where you downloaded the file and extract the binary 2. Download the Mellanox Firmware Tools & Documents (MFT) http://www.mellanox.com/page/management_tools 3. Install MFT 4. Burn the firmware image to the Adapter Card 5. Start MST (Command: "mst start") 6. Find the device name of the adapter (Command: "mst status") Ex. Linux: "/dev/mst/mt4099_cr0" / Windows: "mt4099_cr0" 7. Burn the firmware image to the Adapter Card (Command: "flint -d -i burn" 8. Reboot the system 9. Verify the new firmware version (Command: "ibstat")
Reboot will be required
Need help with network connection issues?
Find a solution in Dell's network troubleshooting and usage guide.