Dell PowerEdge C Mellanox CX3Pro SFP+ Dual Port Mezz Card FW 2.32.5100
Restart requiredAUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
Dell PowerEdge C Mellanox CX3Pro SFP+ Dual Port Mezz Card FW 2.32.5100
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update. Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
To ensure the integrity of your download, please verify the checksum value.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes - Fixed an issue for TLV with length 0. - Fixed an issue related to sync VLAN IRQ operation with trunk IRQ operation. - Fixed an issue which enabled a netdevice (VLAN) to open/close twice. - Fixed an issue which prevented the iSCSI initiator's name from being received from HII. - Fixed an issue related to dual port adapters; occasionally, booting from the second port resulted in TFTP download failure when the first port was already linked up with DHCP, and has received a TFTP address. - Fixed an issue which caused PXE boot failure when using a filename if iSCSI rootpath is set. - Fixed an issue which prevented the device to PXE boot from the 2nd port if first port was already downloaded. - Fixed compilation issue. - Fixed a broken VLAN issue. - Fixed a retry issue when the value is infinite.
Enhancements - Added support to query PTYS, PTOS registers through ACCESS_REG PRM command. - Added support for QCN. - Enabled the driver to use VXLAN offloads on TX side without Device Managed Flow Steering (DMFS). - Added support for CLP access to NVRAM. - Added support for more than 22 QPs per MCG in DMFS. - Added support for high rate steering mode (a.k.a Simplified Steering) - Added support for reading current hardware mode through the QUERY_PORT PRM command. - Added CSUM mode reporting in QUERY_DEV_CAP command. - Added additional configuration options for UPDATE_QP command. - Added support for 128 Byte stride for CQ/EQ. - Enabled module EEPROM access using command I/F. - Reset Flow improvements and graceful handling of error caused by Virtual Functions. - RX performance optimization for single port cards. - Promiscuous mode performance improvements. - Added support for Secure Host mode for ConnectX-3/ConnectX-3 Pro adapter cards. - Added Port protocol configuration option. - Added support for GPIO swap. - 40GbE SI improvements. - Added support for Temp Sensing Vendor specific MAD. - Added validation script for the released ROMs - Added the option to always keep SAN hook to enable WIN install on iSCSI target - Added compilation flag around the flash readout. - Added URI Boot retry. Default retries = 0. - Added Unmap MPT command in teardown. - Added support for HII ISCSI configuration. - Added 64-bit PCI BAR support (Large bar). - Added the option added for running PXE with promiscuous VLAN. - Re-added COMBOOT image support by default. - Enabled pages-function handling in Connect-IB initialization stage to work according to the PRM. - Applied additional patches from ipxe.org - Updated the window even if ACK does not acknowledge new data. - Modified the error print to debug print. - Modified the printed string when initializing devices. - Modified the error print. Added additional information to make the output more user-friendly. - Changed the size of the domain name array to 0xfd. - Disabled the waiting period for link up on trunk-net-device when VLAN is enabled on port. - Removed unsupported EQ event in Connect-IB
Dell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
Download 1. Click the "Download Now" link to download the file Firmware_H6VXH_WN64_2.32.5100.EXE 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation 1. Browse to the location where you downloaded the file and double-click the new file. 2. Read over the release information presented in the dialog window. 3. Download and install any prerequisites identified in the dialog window before proceeding. 4. Click the Install button. 5. Follow the remaining prompts to perform the update.
Reboot will be required
Need help with network connection issues?
Find a solution in Dell's network troubleshooting and usage guide.