Dell PowerEdge C Intel 82599 LAN Mezz Card OP-ROM FW 2.3.27
Restart requiredAUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This option-ROM update is for Dell Dual-Port 10GE daughter mezzanine adapter to support legacy iSCSI preboot.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes - Fail checksum after PXE update its version number in EEPROM - Some platform not recognized as BBS capable - Legacy PXE not clearing I2C semaphore on 82599 NIC QSFP - PXE boot agent does not load when Intel Boot Agent is set to "Try network first" - PXE PDK APITEST hangs with PXE 1.5.33 - PXE 10G does not get IP from DHCP on 10G switch with STP enable
Enhacemants - Add checks for the managebility VETO bit and prevent SW from affecting link it the bit is set - Change PXE option 61 back to original setting - Make PXE check protocol selection bits in NVM
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Step 1. Run "bootutil.exe" in pure DOS first. The total Intel NIC devices in system will show as table below: Please notice that below result might be different by different system configuration.
Port Network Address Series WOL Flash Firmrare Version ==== =============== ======= === ================================ ======= 1 AB9876543210 Gigabit YES FLASH Not Present 2 AB9876543211 Gigabit YES FLASH Not Present 3 AB9876543212 Gigabit NO PXE 1.5.13 4 AB9876543213 Gigabit NO PXE 1.5.13 5 AB9876543214 Gigabit NO PXE 1.5.13 6 AB9876543215 Gigabit NO PXE 1.5.13
Please confirm which port will be updated by checking Network Address above.
Step 2. Run "bootUtil -NIC=X -UP=PXE" Where "X" is the port which will be updated. Please reboot system after flash completed
Reboot will be required
Need help with network connection issues?
Find a solution in Dell's network troubleshooting and usage guide.