Nautilus update package for LiteOn SATA SSD firmware 11E4 for model number(s) EBE-120NAS and ECE-120NAS; firmware 11S4 for model number(s) EBT-480N9S, EBT-960N9S ECT-480N9S, ECT-960N9S, ECT-1920N9S; firmware 11Y4 for model number(s) EBE-100NAS, EBE-200NAS, EBE-400NAS, ECE-100NAS, ECE-200NAS, ECE-400NAS, ECE-800NAS; firmware 11Z4 for model number(s) EBT-60N9S, EBT-120N9S, ECT-60N9S, ECT-120N9S.
Restart requiredAUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This is a Nautilus UEFI release for four LiteOn firmware packages as follows: LiteOn 11E4 for model number(s) EBE-120NAS and ECE-120NAS. LiteOn 11S4 for model number(s) EBT-480N9S, EBT-960N9S ECT-480N9S, ECT-960N9S, ECT-1920N9S. LiteOn 11Y4 for model number(s) EBE-100NAS, EBE-200NAS, EBE-400NAS, ECE-100NAS, ECE-200NAS, ECE-400NAS, ECE-800NAS. LiteOn 11Z4 for model number(s) EBT-60N9S, EBT-120N9S, ECT-60N9S, ECT-120N9S.
This is for use on PowerEdge platforms that support UEFI boot mode for SATA drive updates. This Nautilus package only contains the firmware packages listed above.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes: -Addressed a rare condition where the drive would incorrectly return an error during a read operation. -Corrected the drives self reporting of capabilities
Dell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
This update will not run if any of the following conditions exist 1. Any Virtual Disk that is not optimal. 2. A RAID container that is performing a Background Initialization or Consistency Check. 3. A Rebuild, Resync, or copyback function is taking place. 4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
1. Click Download File to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation 1. Browse to the location where you downloaded the file and double-click the new file. 2. Click Continue to extract it and select a location. 3. Go to the directory where the files where extracted and open the Nautilus folder. 4. Click on 'UsbMake.exe' and either install to a USB drive or create an ISO. 5. Make sure the system boot mode is set to UEFI and boot to the ISO or the USB key. 6. Follow the prompts to install the firmware.