Dell Support Drivers & Downloads Driver File Formats

Driver Details

Link
Adaptec PERC3/Di, v.2.8.1.6098, A10
This software contains v2.8.1.6098 Firmware for the PowerEdge 2550 & PowerVault PV755N PERC 3/Di controller.
Release Date 10/13/2005
Importance: Recommended
Version: 2.8.1.6098,A10

The following formats are available for the file you have selected

File Format: Floppy Download File Download File
File Name:

PE2550-PV755N-281_6098-A10.exe

Description: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
Download Type: HTTP
File Size: 1MB

File Format: Update Package for Microsoft® Windows® Download File Download File
File Name:

PE2550_PV755N_RAID_FW_WIN_A10.EXE

Description: Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
Download Type: HTTP
File Size: 1MB

Previous Versions

No previous version available.

Description

This software contains v2.8.1.6098 Firmware for the PowerEdge 2550 & PowerVault PV755N PERC 3/Di controller.

Level of Importance:Recommended

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).

Important Information

Important information about this package =========================================== * This firmware package supports PERC 3/Di in following platforms: -PowerEdge 2550, integrated PERC 3/Di, non-PAE only -PowerVault 755N, integrated PERC 3/Di, non-PAE only * This firmware REQUIRES minimum System BIOS rev A09 PRIOR to flashing the firmware. Flashing this firmware to the system without first having updated to the above BIOS will render the system inoperable. * Before updating your system to v2.8 level using Update Packages for Windows, please make sure your firmware level is at least v2.6 for your PERC 3/Di controller. * PERC 3/Di on PE2550 servers or PV755N appliances using legacy firmware levels of 2.1.3 or 2.1.5 will require the following steps to assure a successful manual update to firmware revisions 2.8.x. Steps for manual update from firmware v2.1.X to firmware v2.8.x: To assure a proper update to the PERC 3/Di Windows driver version 2.5 or later, it is necessary to apply the driver 2.1-5 patch prior to updating to the driver version 2.5. Failure to install the driver patch may result in a system hang followed by a blue screen error during the reboot. ***NOTE: This patch file is not included nor is it needed with PERC 3/Di driver versions 2.6, 2.7, or 2.8. The driver upgrade patch is only required on systems using older PERC 3/Di 2.1.x firmware/driver code running Windows 2000. Systems already using version 2.5 can be updated directly to version 2.7.0 or higher without problems. To update to version 2.5: Run the 2.1.x driver patch (p3patch.bat) included with the Windows 2000 2.5 driver download files. Update the Windows 2000 driver to 2.5. Update the firmware to version 2.5 when rebooting the system. To update from version 2.5 to version 2.8.x: Update System BIOS PRIOR to flashing the firmware. Minimum system BIOS required is A09. Update the Windows 2000 driver to 2.8.x. Update the firmware to version 2.8.x when rebooting the system.

Compatibility

Systems
PowerEdge 2550
PowerVault 755N (Rackmount NAS Appliance)
Operating Systems
Not Applicable

Applies to

  • Dell Device
  • PERC3/Di

Fixes & Enhancements

Fixes and Enhancements ========================== 2.8.1 Build 6098 ---------------- - fixed an issue which occurs when reconfiguring an array with CLI while array was under stress; can result in kernel panic in Linux. - fixed a bug where a 300GB hard drive could not be assigned as a hot spare for a 300GB R1 using full drive capacities. 2.8.1 Build 6097 ---------------- -fixed a defect which occurs when reconfiguring an array to a size greater than 1.09 terabytes; can result in data loss. –fixed bug where previous firmware did not re-calculate disk capacity when a drive is replaced. 2.8.0 Build 6095 ---------------- -single bit change to turn off flag indicating 64-bit compatibility. Needed to fix OMSS Enclosure support issue with RHEL4. 2.8.0 Build 6092 ---------------- -Background controller cache flush routine modified to flush smaller number of buffers during I/O without impacting RAID throughput. This change fixes driver timeout (manifesting as loss of drive access and filesystem errors like ext3_get_inode_loc errors) seen under certain Linux configurations. 2.8.0 Build 6089 ---------------- -Default changed to 30 Second Timeout for controller BIOS option to pause or continue when RAID configuration is found altered or degraded. This behavior is same as pre v2.8 firmware behavior. 2.8.0 Build 6082 - Initial release of v2.8 firmware --------------------------------------------------- -The ROMB firmware modified eliminating need for separate SCSI driver when channel-B is configured as SCSI. Now only one driver is needed for both RAID/RAID and RAID/SCSI configurations (not applicable to PERC2/QC). -Controller BIOS option added to pause or continue after 30 seconds timeout when RAID configuration is found altered or degraded. -Additional ESM fix for pulled/missing drives. -HIM_PCI_ERR correction to power management interrupt. -Cache flush loop decreased to prevent extensive spin-lock hold during high I/O. -AFU fix to block firmware installation based on proper level System BIOS. -SCSI Passthru Event filtering. -Disallow selection of drive to create raid when already reach maximum limit. -Disable interrupts around doing queue accesses in CompleteFIB( ).

Installation instructions

            
Instructions for PE2550-PV755N-281_6098-A10.exe

Download 

1. Click the Download Now link to download the file. 
2. When the File Download window appears, click Save to save the file to your hard drive. 

Diskette Creation 
1. Browse to the location where you downloaded the file and double-click the new file to create the diskette set. 
2. Insert a blank diskette then click Continue. 
3. When prompted, repeat step 2 until you reach the end of the diskette set. Label each diskette with a disk number starting from 1. 
4. After all the files have been copied to the last diskette, click Finish. 


Firmware Installation
=========================
The firmware update utility on this diskette is DOS-based and named AFU.EXE. It offers both interactive and command line modes. 


Performing the PERC 3/Di Firmware Upgrade in Interactive Mode
-------------------------------------------------------------
The AFU interactive mode is entered by issuing the AFU command with no command line switches. This mode simplifies the firmware update process for PERC 3/Di when one or more PERC 2/3 controllers are present.

To update the firmware using the AFU interactive mode, follow these steps:

1. Shut down your system.

2. Reboot the system with the diskette labeled:
  DELL PERC 3/Di Firmware
  Disk 1 of 2

***NOTE: If the system has not been set up to boot from the diskette, please read system documentation for instructions on how to set this up.

3. At the DOS prompt, enter the following command and press ENTER:

  A:\> AFU

This starts the AFU in interactive mode. The AFU will detect the integrated PERC 3/Di and any installed PERC 2 controllers and present them for selection in a list.

4. If only PERC 3/Di is detected then AFU will select it. Otherwise, using the arrow keys, highlight PERC 3/Di and select it by pressing the space bar and press ENTER.

5. A "Select an Operation" menu will be presented. Select the following option and press ENTER:

  Update flash image

6. The AFU will issue the following message:

  Update from the flash image file in directory:
  A:
Change the directory if necessary, then use the TAB key to select the OK box, and press ENTER.

7. AFU will issue following message:

  Reading flash image file (Build xxxx)...

8. AFU will issue following message after reading flash image from first diskette:

  Please insert disk labeled "PERC 3/Di Firmware disk 2" 

9. Insert the second diskette and press ENTER. 

10. AFU will complete reading the flash image and issue following message:

  AFU is about to update firmware on controller(s) Dell PERC 3/Di
  *** PLEASE DO NOT REBOOT THE SYSTEM DURING THE UPDATE *** 
  This might take a few minutes. Select OK to continue.       


11. Select the OK box, then press ENTER. AFU will proceed to update the firmware and issue following message:

  Writing PERC 3/Di integrated flash image to controller 0 ...   

This message will be followed by additional progress messages. When the flash update has completed, you will see this message:

  Controller #0 Dell PERC 3/Di
  Flash image was updated and verified successfully

***NOTE: If you selected multiple controllers, AFU will prompt you to insert the diskette after the successful update of first controller. Please insert firmware diskette 1 for second controller.

12. Press any key, then press the ESC key to exit AFU. Remove any diskettes from the drive and reboot the system.

***NOTE: System must be rebooted after performing firmware update on PERC 3/Di before attempting any access to drives attached to the controller. 

Performing the Controller Firmware Upgrade in Command Line Mode
---------------------------------------------------------------
AFU in command line mode returns its exit status (zero for success or non-zero for an error) in the DOS environment variable ERRORLEVEL. 

The following instructions explain how to upgrade the control            
        

Checksum

To ensure the integrity of your download, please verify the checksum value.

This is an optional process and is not required for the downloading and installation of device drivers from this site.
MD5:
Not Available
PE2550-PV755N-281_6098-A10.exe
SHA1:
Not Available
PE2550-PV755N-281_6098-A10.exe
SHA-256:
Not Available
PE2550-PV755N-281_6098-A10.exe

By downloading, you accept the terms of the Dell Software License Agreement.