Dell Support Drivers & Downloads Driver File Formats

Driver Details

Windows 2003 Driver for Dell PERC S300 Adapter, PERC S300 Integrated Modular, PERC S100 Integrated, RMSD_PERC S100 Integrated, v., A05
Windows Server 2003 S100/S300 Controllers
Release Date 3/23/2011
Importance: Recommended

The following formats are available for the file you have selected

File Format: Hard-Drive Download File Download File
File Name:


Description: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Download Type: HTTP
File Size: 376KB

File Format: Rel-Notes-Text Download File Download File
File Name:


Description: This file format contains plain text which can be viewed with a standard text editor.
Download Type: HTTP
File Size: 4KB

File Format: Update Package for Microsoft® Windows® Download File Download File
File Name:


Description: Dell Update Packages in Microsoft Windows 32-bit format can be deployed on Microsoft 64-bit operating systems by implementing the WOW64 emulation applications. WOW64 is a standard feature on most Microsoft operating systems.
Download Type: HTTP
File Size: 5MB

Previous Versions

No previous version available.


Windows Server 2003 S100/S300 Controllers

Level of Importance:Recommended

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).

Important Information

- Only a single ODD is supported as a boot device. Up to two ODDs can be supported on a system. - When installing an S300, make sure the S100 is disable in the platforms BIOS. The ODD will not function if S100 is active with S300. - W2K3 SP2 or later required for S100 and S300. NOTE! Windows 2003 R2 is not supported. - The BCRAID.SYS and BCCFG.SYS drivers both need to be updated when performing an update using the Zip Pack. Each driver is updated manually. - OM 6.2.0 or higher required to manage S100 and S300 controllers.


External OEMR R210II
External OEMR R310
External OEMR R410
External OEMR R510
External OEMR R910
PowerEdge R210
PowerEdge R210 II
PowerEdge R310
PowerEdge R410
PowerEdge R415
PowerEdge R510
PowerEdge R515
PowerEdge T110
PowerEdge T110 II
PowerEdge T310
PowerEdge T410
PowerVault DL2200
PowerVault DL2200 CommVault
PowerVault NX200
Operating Systems
MS Windows Server 2003

Applies to

  • MOD,INFO,S300,2 HDD
  • MOD,INFO,S300,3 TO 8 HDDS
  • MOD,INFO,S300,9 TO 24 HDDS
  • PERC S300 Adapter

Fixes & Enhancements

- Background Array Scan - Boot to RD1000 Tape - Consistency Check startup on existing virtual disks after a new virtual disk is created - Default VD cache policy is changed to "No caching" - Support for CougarPoint chipset for S100 - New System support for S300: Coaster, Diamas and Skipper, Slinky - UEFI boot enablement

Installation instructions

Dell Update Package Instructions

1. Click Download Now to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.

Zip Files

1. Click the Download Now link to download the file. 
2. When the File Download window appears, click Save to save the file to your hard drive. 

Extract Files 
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package 
2. Click Continue. 
3. Specify the location to unzip the files. 
4. Click OK to extract files. After the files are extracted the message all files were successfully unzipped will appear.
5. Click OK to exit from the installer.

1. Copy extracted files to media accessible to Windows.
2. Reboot system to Windows OS.
3. Follow Server Manager->Device Manager->Storage Controller, click on the PERC Controller.
5. Click on Update Driver Software and follow the prompts to update the driver.
4. Reboot system for changes to take effect.            


To ensure the integrity of your download, please verify the checksum value.

This is an optional process and is not required for the downloading and installation of device drivers from this site.

By downloading, you accept the terms of the Dell Software License Agreement.