LiteOn IT LCS-256M6S Solid State Drive Firmware Update
Restart requiredAUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This package provides the firmware update for LiteOn IT LCS-256M6S 2.5 256GB, Revision DC8110E, and is supported on Precision, OptiPlex, PowerEdge, Latitude, XPS, Alienware and Inspiron models running the following Windows operating systems: Vista, Windows 7, Windows 8 and Windows 8.1.
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Dell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
WARNING: As with all firmware updates, it is strongly recommended that you backup or make copies of all important files before performing this update. This firmware update process is done entirely at your own risk. If performed correctly, there will be no loss of system or user data on the drive. However, if the firmware process is interrupted for any reason, your solid state drive may not function properly.
1. Click Download File and follow the remaining prompts to download the file. 2. When the File Download window appears, click Run to unzip the download package into your hard drive. 3. The file explorer will open pointing to the directory containing the download package. Please take note of the path.
ATTENTION 1. Backup the Solid-State Drive. 2. Switch to AC Power.
Procedure 1. Go into the Windows sub-directory and run the utility contained therein to start firmware update process. 2. On the first screen, if the target SSD is not listed, select it and then Click "Update". 3. The next screen is a warning message. It states the risks and reminds user to backup important files before proceeding. Please click "OK" to proceed. 4. Firmware upgrade will proceed. When the firmware upgrade process completes, the user will be prompted to reboot the machine. Please close all open applications and save your work before rebooting your machine. 5. The system will reboot and load the firmware. Once the firmware update is complete (screen will show firmware update done), you can boot into Windows. 6. To confirm the firmware update was successful, open Device manager -> open SSD -> click Properties -> choose hardware ID under Details and check the firmware version.
ATTENTION 1. Backup the Solid-State Drive. 2. Switch AC Power. 3. The DOS utility supports only Intel systems.
Procedure 1. Go into the DOS sub-directory. 2. Insert a blank CD-R disc into your CD/DVD R/W drive. 3. Burn the ISO image into a CD-R media. 4. Insert the CD-R (created from the above steps) into the CD-ROM/DVD drive in the target system. 5. Boot your system from the CD/DVD drive (for instructions, please refer to the manual that came with your system). 6. Please select the targeted drive once your system boots into DOS. 7. The next screen is a warning message. It states the risks and reminds user to backup important files before proceeding. Please click "Y" to proceed. 8. Firmware upgrade will proceed. When the firmware upgrade process completes, the user will be prompted to reboot the machine. Remove the CD-R from your CD/DVD drive, and reboot your system. It will boot into Windows. 9. To confirm the firmware update was successful, open Device manager -> open SSD -> click Properties -> choose hardware ID under Details and check the firmware version.